User's Manual

*
Meraki MX60W Installation Guide
| 6
5. WAN light will turn orange after boot up and initial link.
6. WAN light will turn green when Internet connection detected.
7. WAN light will start flashing orange after 5 minutes, if there a
WAN link is found, but there is no proper Internet connection.
8. LAN lights will turn green if any device is connected on the
LAN side or they will be off otherwise.
1.3 The MX60W Back Panel
1.3.1 Internet Port
The MX60W supports only one Internet / WAN connection
1.3.2 LAN Ports
The MX60W has four LAN ports, called LAN 1, LAN 2, LAN 3, and LAN
4. These ports can be connected to devices like computers, printers,
access points, or Ethernet switches.
1.3.3 USB Port
The MX60W has one USB 2.0 port. This port is reserved for future use.
1.3.4 Reset Button
Pushing the reset button for 30 sec. will default the MX60W to its
factory-reset values.
1.3.5
Reset LAN 4 LAN 3 LAN 2 LAN 1 Internet USB Power