Manualshelf

Setup Guide

ManualsBrandsCisco Systems ManualsElectronicsWireless 802.11 abgn/ac AP
11121314151617181920
18
4.2.2.1 Powering the MR42 with the Meraki AC Adapter (sold separately)
1. Plug the power cord into the MR42 and the other end into a wall outlet.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the Eth0 port on the MR42.
4.2.2.2 Powering the M42 with the Meraki 802.3at Power over Ethernet Injector (sold separately)
1. Plug the power cord into the PoE Injector and the other end into wall power.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the “IN“ port on the injector.
3. Route Ethernet cable from the “OUT“ port on the injector to the Eth0 port in the cable bay of the MR42.