User's Manual

80
D1534503B User Guide
Cisco TelePresence
Produced: March 2017 for CE 8.2
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
You may specify whether to use IPv4
or IPv6 and whether to use static IP
address or DHCP.
When set to Static, applicable
addresses must be set accordingly.
To change these from default values,
tap Advanced (not shown).
Caution! There is no Cancel
function letting you exit the menu
undoing any changes you have
made. Take care!
Settings
Administrator Settings—IP & VLAN, Codec
About IP Settings
To exit
Administrator
Settings, tap
Back.
To exit Settings
as such, tap
Exit.
Note that there
is no Cancel
function letting
you exit the
menu undoing
any changes you
have made.
Take care!