User's Manual

D1534506 Cisco TelePresence User Guide
Systems using Touch10
Produced: April 2017 for CE9.0
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
36
Camera
Systems equipped with a speaker
tracking camera system use two
cameras working together with
a built-in microphone array. The
system will track and show the
person speaking so that you won’t
have to use the Camera Control
menu or Camera Presets to zoom in
and out.
When speaker tracking has been
activated, the camera position
presets will still be available.
However, if you tap a camera
position preset while in speaker
tracking mode, one of the cameras
will respond accordingly and the
speaker tracking will be deactivated.
Activate speaker tracking as shown
on this page again, if needed.
Note Speaker tracking will not work
if the microphones are muted.
Speaker tracking may be expanded
to include the Snap to Whiteboard
feature, as outlined on the following
page.
About Speaker Tracking
Speaker Tracking
To enable Speaker Tracking, tap Camera, in the
upper right corner.
Activate the Speaker Tracking feature by
tapping the button in the upper right corner.
1 2
3
Tap anywhere outside the menu to exit.
To deactivate Speaker Tracking, repeat the
procedure.