User's Manual

3
Power System - Power over Ethernet (PoE)
The Meraki MR58 accepts Power over Ethernet (802.3af); the Meraki PoE 802.3af injector
is sold separately. Instructions contained in this setup guide assume your MR58 will be
powered by the Meraki PoE 802.3af injector.
The power system contains the following:
Antennas
The Meraki MR58 has three 802.11n radios. Each radio has two external antenna connectors;
both connectors for a particular radio should be attached to the same type of antenna.
Meraki offers a number of different antennas for use with the MR58. Alternately, you may
purchase 3rd party antennas for use with the MR58. Make sure they have N-type connectors
and support the proper frequency band (2.4 or 5GHz).
PoE injector Country-specific AC power cableAC/DC Power converter with barrel plug