A P P E N D I X A Attribute Reference This section references all objects and their attributes that are used by the Cisco 6400 Equipment Module. The attribute tables in this section follow a convention that will help you easily identify important information such as derived values and mandatory attributes.
Appendix A Attribute Reference Table Conventions Cisco 6400 Equipment Module Attribute Reference Tables (continued) Element Type Element Name Table Service Elements Cross-connection Profile Table A-25 NRP Internal PVC Profile Table A-26 Table Conventions The following codes describe attribute behaviour. They appear on a separate line in the attribute column for each attribute. Table A-2 Attribute Reference Table Conventions Code Description M Attribute is Mandatory.
Appendix A Attribute Reference Network Table A-3 Network Attributes Acceptable Values Name [srname] Text (64) Default Values This is the network name. This name must be unique across all networks. M, C Customer [vpn] Text (16) This is the customer name. This attribute is optional. W Domain [domain] Text (16) This is the domain name. This attribute is optional. W Common Parameters Containing Network [srsubnet.
Appendix A Attribute Reference RADIUS Server Table A-3 Network (continued) Attributes Acceptable Values Resource Map [srrmmap] Numb (10) Range=0-214748 This attribute is an integer used to carry a bit map of services supported by 3647 this Network. Default Values 48 W Pre-provisioned [srpreprov] Enum (4) "Full" "Init" "None" Indicates if the object is pre-provisioned or not. The default value is None, indicating that the network object is not pre-provisioned.
Appendix A Attribute Reference RADIUS Server Table A-4 RADIUS Server (continued) Attributes Acceptable Values Default Values RADIUS Radius Version [c4_rad_ver] This is the RADIUS version. Cisco Provisioning Center supports Merit RADIUS version 3.6B. R Enum (14) "none" "Merit_AAA_3.6 B" Primary RADIUS Radius User Name [c4_rad_user1] Text (32) Specify a valid user name for the RADIUS server.
Appendix A Attribute Reference RADIUS Server Table A-4 RADIUS Server (continued) Attributes Acceptable Values Backup Radius Server [c4_rad_name2] Default Values Text (32) This is the name of the backup RADIUS server. You can use the hostname or the IP address of the RADIUS server. W Backup Radius Auth Port [c4_rad_authport2] This is the authentication port on the backup RADIUS server. W Backup Radius Acct Port [c4_rad_actport2] This is the accounting port on the backup RADIUS server.
Appendix A Attribute Reference Node Node Object Name: C4ndNode OAF: C4ndNode.oaf Table A-5 Node Attributes Acceptable Values Default Values Common Attributes Name [srname] Text (64) This is the node name. After the node is saved and committed to the database, this field will be read-only. M|C Customer [vpn] Text (16) This is the customer name. This attribute is optional. W Domain [domain] Text (16) This is the domain name. This attribute is optional. W Containing Network [srnetwork.
Appendix A Attribute Reference Node Table A-5 Node (continued) Attributes Acceptable Values Containing Region [srarea] Text (32) Default Values The name of the administrative area containing the router (a LATA, for example). This attribute is optional. W Geographical Location [srgeogloc] Text (32) This is the geographical location of the router (for example, a GPS reference). This attribute is optional.
Appendix A Attribute Reference Physical Port Table A-5 Node (continued) Attributes Acceptable Values Access User Name [c4_accname] Text (32) Default Values This is the same value as the NSP Management Access username configured on the NSP. M|C Access Password [c4_accpasswd] Text (32) This is the same value as the NSP Management Access password configured on the NSP. M|C Enable Password [c4_enablepasswd] Text (32) This is the enable password for the NSP.
Appendix A Attribute Reference Physical Port Table A-6 Physical Port Attributes Acceptable Values Default Values Common Attributes Name [srname] Text (24) This is the physical port name. M|C Customer [vpn] Text (16) This is the customer name. W Domain [domain] Text (16) This is the domain name. W Port Type [srporttype] Indicates the type of port. R Port Number [srportnumber] Enum (5) DS3, OC3, OC12, CPU, NRP, NRP2, Other Numb Indicates the number of the port on the card.
Appendix A Attribute Reference Physical Port Table A-6 Physical Port (continued) Attributes Acceptable Values Default Values EMS Name [sremsname] The name of the physical port used in the Element Management System. R Administrative State [sradminstatus] Indicates the administrative state of the physical port profile. Enum (8) Locked, Unlocked R Resource Model Specific Map [srrmmap] Resource model specific map.
Appendix A Attribute Reference Logical Port Table A-6 Physical Port (continued) Attributes Acceptable Values Default Values 6400 Physical Port Parameters Access Name [c4_accname] Text (32) The IOS account name for the NRP/NRP2 associated with this port. W Access Password [c4_accpasswd] Text (32) The IOS account password for the NRP/NRP2 associated with this port. W Enable Password [c4_enablepasswd] Text (32) The IOS enable password for the NRP/NRP2 associated with this port.
Appendix A Attribute Reference Logical Port Table A-7 Logical Port (continued) Attributes Acceptable Values Domain [domain] Text (16) Default Values This is the domain name. W Protocol [srprotocol] Text (10) "ATM" Specify the protocol. M Signalling Role [srsignallingrole] Enum (3) "DTE" "DCE" A DCE logical port represents the "network side" equipment. This logical port type supports all types of PVCs. A DTE is almost identical to the DCE logical port except for SVC applications.
Appendix A Attribute Reference Logical Port Table A-7 Logical Port (continued) Attributes Acceptable Values Default Values Priority [srpriority] Numb (10) Range=0-214748 3647 0 The logical port usage priority. W Multiple Service Ranges [srmultirange] Bool (5) Indicates if the logical port has multiple service ranges. W Multiple Fabric Ranges [sremultirange] Bool (5) Indicates if the logical port has multiple fabric ranges.
Appendix A Attribute Reference Logical Port Table A-7 Logical Port (continued) Attributes Acceptable Values EMS Name [sremsname] Text (65) Default Values The name of the logical port used in the Element Management System. R Bandwidth Incoming Maximum (kbits/s) [sraz_bandwidth] Numb (10) Range=0-214748 3647 The maximum incoming bandwidth for the logical port. W Nominal Threshold (%) [sraz_cbnt] Numb (10) Range=0-214748 Specify the incoming committed bandwidth nominal threshold percentage.
Appendix A Attribute Reference Cross Connection Table A-7 Logical Port (continued) Attributes Acceptable Values Default Values 6400 NRP Specific Routing [c4_routing] Bool (5) Specify whether to enable or disable routing. W Tunneling [c4_tunneling] Bool (5) Specify whether to enable or disable tunneling. W Multihopping [c4_multihop] Bool (5) Specify whether to enable or disable multihopping. W Host Name [c4_hostname] Text (32) The host name of the NRP/NR2 associated with this logical port.
Appendix A Attribute Reference Cross Connection Table A-8 Cross Connection Attributes Acceptable Values Default Values Common Attributes Name [srname] Text (64) Specify a name for the cross-connection. M|C Customer [vpn] Text (16) This is the customer. This attribute is optional. W Domain [domain] Text (16) This is the domain. This attribute is optional. W Profile [srprofile.sy_profname] Text (32) Select a profile for the cross connection on the NSP. This attribute is optional.
Appendix A Attribute Reference Cross Connection Table A-8 Cross Connection (continued) Attributes Acceptable Values Default Values Transit Cost [srcost] Numb (10) Range=0-214748 3647 0 This is the cost of crossing the sub-network. This attribute is used by the Threader to determine the lowest cost path when threading a service. M ATM LPort Associations A Endpoint LPort [sra_tp.srname] Text (32) This is the logical port designated as the A endpoint of the cross-connection.
Appendix A Attribute Reference Cross Connection Table A-8 Cross Connection (continued) Attributes Acceptable Values Default Values Circuit Type [ratype] Enum (2) "VC" "VP" Specify the circuit type. It can be either a virtual circuit (VP) or virtual path (VP). C|P Class of Service [raqos] You can specify the class of service for ATM traffic. The class of service determines which traffic descriptor you can select.
Appendix A Attribute Reference Cross Connection Table A-8 Cross Connection (continued) Attributes Acceptable Values Maximum Burst Size (cells) [raaz_mbs] Numb (10) Range=0-214748 MBS is the maximum number of cells that can be received at the PCR. This allows a burst of cells to arrive at a rate higher than the SCR. If the burst is 3647 larger than anticipated, the additional cells are either tagged or dropped. This parameter applies only to VBR traffic.
Appendix A Attribute Reference Cross Connection Table A-8 Cross Connection (continued) Attributes Acceptable Values Default Values Minimum Cell Rate (cells/s) [raza_mcr] Numb (10) 0 Range=0-214748 MCR is the minimum cell rate, which is the minimum allocated bandwidth 3647 for a connection. W|P Maximum Burst Size (cells) [raza_mbs] Numb (10) MBS is the maximum number of cells that can be received at the PCR. This Range=0-214748 allows a burst of cells to arrive at a rate higher than the SCR.
Appendix A Attribute Reference NRP Internal PVC NRP Internal PVC Object Name: C4cxPvcx OAF: C4cxPvcx.oaf Table A-9 NRP Internal PVC Attributes Acceptable Values Default Values Common Attributes Name [srname] Text (30) Specify a name for the cross connection. M|C Customer [vpn] Text (16) This is the customer name. W Domain [domain] Text (16) This is the domain name. W Profile [srprofile.sy_profname] Text (32) This is a pointer for the PVC profile object.
Appendix A Attribute Reference NRP Internal PVC Table A-9 NRP Internal PVC (continued) Attributes Acceptable Values CNX Type [c4_type] Enum (11) subscriber, service, multihop_in, idsl_sub, pppip, other This is the CNX type. W Service Name [c4_servicename] Default Values Text (32) This attribute is used only on a Subscriber C4CNX-Static Domain binding. W Sub-interface Type [c4_subif] numb (10) Range=1-214748364 7 This is the sub interface number.
Appendix A Attribute Reference NRP Internal PVC Table A-9 NRP Internal PVC (continued) Attributes Acceptable Values Next-Hop IP Address [c4_remtipaadr] Text (15) Default Values The IP address of the remote end of the PVC sub interface. W Upper Layer Protocol [c4_protocol] This is the upper layer protocol type. W Enum (14) ip_broadcast, ip_nobroadcast, inarp, none VC Class Attributes QoS Class [c4_qos] This indicates the class of service. W Enum (9) NRP1 supports UBR and nrt.VBR only.
Appendix A Attribute Reference Singlehop Tunnel Table A-9 NRP Internal PVC (continued) Attributes Acceptable Values Authentication [c4_authenticate] ms-chap, pap, chap, callin, optional, one-time (or a combination of these in the correct sequence) This is the authentication type. W Unnumbered IP Address in VT [c4_vt_ipaddr] Default Values Text (40) Specify an interface or subinterface that will enable IP without a static IP address (i.e. fastethernet 0/0/0).
Appendix A Attribute Reference Multihop Tunnel Table A-10 Singlehop Tunnel (continued) Attributes Acceptable Values Tunnel Name [tunnelname] Text (32) Default Values The is the tunnel named used for authentication at a remote site./ W Tunnel Password [password] Text (32) This is the tunnel password. W Contained/Carried By Radius [c4radius.srname] Text (32) This is the RADIUS server that deposits this tunnel. R Multihop Tunnel Object Name: C4mtTunnel OAF: C4mtTunnel.
Appendix A Attribute Reference Multihop Tunnel Table A-11 Multihop Tunnel (continued) Attributes Acceptable Values Remote Tunnel Name [rtunnel] Text (64) Default Values The tunnel name for the counterpart at the LAC. This attribute applies to only MHIT). W Remote Tunnel Password [rpassword] Text (32) The remote tunnel password (MHIT only).
Appendix A Attribute Reference Aggregation Key Aggregation Key Object Name: C4akAggrKey OAF: C4akAggrKey.oaf Table A-12 Aggregation Key Attributes Acceptable Values Customer [vpn] Text (16) Default Values This is the customer name. This attribute is optional. Domain [domain] Text (16) This is the domain name. This attribute is optional.
Appendix A Attribute Reference Singlehop Tunnel Destination Table A-12 Aggregation Key (continued) Attributes Acceptable Values Default Values Common Parameters Aggregation Key [aggrkey] Text (64) This is the type of aggregation key. Aggregation Type [aggrtype] Enum (10) This is the cost of crossing the sub-network. This attribute is used by TunnelName, Domain the Threader to determine the lowest cost path when threading a service. 50 M Contained/Carried By Multihop Tunnel [c4mtunnel.
Appendix A Attribute Reference Multihop Tunnel Destination Table A-13 Singlehop Tunnel Destination (continued) Attributes Acceptable Values Default Values Authenticator Specific Parameters Destination IP Address [dest_ip] Text (15) The destination IP address. W Session Limit [sessionlimit] Numb (5) The limit for the number of sessions that can run over the tunnel. A -1 Range=0-32767 indicates no delivery. 0 W Priority [priority] The priority for the tunnel destination.
Appendix A Attribute Reference Service List Table A-14 Multihop Tunnel Destination (continued) Attributes Acceptable Values Default Values Tunnel Specific Parameters Destination IP Address [dest_ip] Text (15) The destination IP address. This is the IP address of the LNS. W Session Limit [sessionlimit] Text (10) The maximum number of sessions per tunnel. W Priority [priority] Text (10) The priority for the tunnel destination. W Contained/Carried By Multihop Tunnel [c4mtunnel.
Appendix A Attribute Reference IOS QOS Table A-15 Service List (continued) Attributes Acceptable Values Default Values Service List Parameters Subscriber ID [subscriberid] Text (64) Specify the subscriber ID. W Service Name [servicename] Text (255) This is the service associated with the tunnel. W Contained/Carried By Radius [c4radius.srname] Text (32) A pointer to the RADIUS server containing the tunnel. R IOS QOS Object Name: C4iqQos OAF: C4iqQos.
Appendix A Attribute Reference VC Class Table A-16 IOS QOS (continued) Attributes Acceptable Values Default Values PCR [pcr] Numb (10) Range=0-214748364 7 0 Numb (10) Range=0-214748364 7 0 Numb (10) Range=0-214748364 7 0 Numb (10) Range=0-214748364 Cell Delay Variation Tolerance establishes the time scale over which 7 the PCR is policed. This is set to allow for jitter (CDV). 0 PCR is the maximum allowed cell transmission rate.
Appendix A Attribute Reference VC Class Table A-17 VC Class (continued) Attributes Acceptable Values Customer [vpn] Default Values Text (16) This is the customer. This attribute is optional. W VC-Class Parameters VC-Class Name [vcclassname] Text (16) This is the VC-Class name as in IOS. By default, this value is autocalculated, but a value can be supplied. M|C Service Name [c4_servicename] Text (32) This is the service name key that associates a subscriber with a tunnel.
Appendix A Attribute Reference VC Class Table A-17 VC Class (continued) Attributes Acceptable Values Encapsulation [encapsulation] Enum (12) "aal5ciscoppp" "aal5autoppp" "aal5snap" "aal5mux" "aal5nlpid" Specify the ATM adaptation layer (aal) and the encapsulation type. C Used In [c4_use] This is the use parameter. Specify the type of service which will use this VC Class.
Appendix A Attribute Reference Virtual Template Table A-17 VC Class (continued) Attributes Acceptable Values Default Values Virtual Template Parameters Authentication [authentication] Text (80) This is the authentication type. When none is selected, no authentication will be performed. PAP will enable Password Authentication Protocol to authenticate the tunnel. CHAP will enable Challenge Handshake Authentication Protocol to authenticate the tunnel.
Appendix A Attribute Reference Virtual Template Table A-18 Virtual Template (continued) Attributes Acceptable Values Default Values Virtual Template Parameters Virtual-Template index [vtindex] Numb (4) This is the virtual template index number that is auto assigned by IOS. Range=0-2000 0 A Description [c4_description] Text (80) "" Text (80) "" Text (40) FastEthernet0/0/0 This is a text field provided for a usage description of the virtual template object.
Appendix A Attribute Reference Access Control List Access Control List Table A-19 Access Control List Attributes Acceptable Values Default Values Common Attributes Domain [domain] Customer [vpn] Profile [srprofile.sy_profname] Control List Parameters Access Control List ID [acl_id] Description [name] Contained/Carried By Lport [nrp.srname] Node [nrp.srnode.srname] Network [nrp.srnode.srnetwork.
Appendix A Attribute Reference Access Control Element Access Control Element Table A-20 Access Control Element Attributes Acceptable Values Default Values Common Attributes Domain [domain] Customer [vpn] Access Control Element Parameters Service Name [ace_service] Source Type [source_type] Source IP [source_ip_addr] Source Mask [source_mask] Destination Type [dest_type] Destination IP [dest_ip_addr] Cisco 6400 Equipment Module Configuration Guide OL-1812-01 A-39
Appendix A Attribute Reference Route Entry Table A-20 Access Control Element (continued) Attributes Acceptable Values Default Values Destination Mask [dest_mask] Contained By Access Control List [c4acl.acl_id] Lport [nrp.srname] Node [srnode.srname] Network [srnode.srnetwork.srname] Route Entry Table A-21 Route Entry Attributes Acceptable Values Default Values Common Attributes Customer [vpn] Domain [domain] Profile [srprofile.
Appendix A Attribute Reference Authenticator Table A-21 Route Entry (continued) Attributes Acceptable Values Default Values Acceptable Values Default Values IP Address [ip_address] Netmask [mask] Mapping Target [target] Contained/Carried By LPORT [c4lport.srname] Node [c4lport.srnode.srname] Network [c4lport.srnetwork.
Appendix A Attribute Reference Physical Port Profile Table A-22 Authenticator (continued) Attributes Acceptable Values Default Values Profile [srprofile.sy_profname] Authenticator Specific Parameters Username [username] Password [password] ‘ Text (255) The password for authentication. W Encrypted [encrypted] Bool (5) Use this attribute to set encryption for authentication. R Contained/Carried By LPORT [c4lport.srname] Text (32) The containing logical port. R Node [c4lport.srnode.
Appendix A Attribute Reference Physical Port Profile Table A-23 Physical Port Profile (continued) Attributes Acceptable Values Customer [vpn] Text (16) Default Values This is the customer name. W Domain [domain] Text (16) This is the domain name. W Port Type [srporttype] Enum (5) DS3, OC3, OC12, CPU, NRP, NRP2, Other Indicates the type of port. W Provisionable Bandwidth (kbits/s) [srbandwidth] Numb (10) 0 Range=0-214748364 7 Indicates the total bandwidth of the port, in kbits/s.
Appendix A Attribute Reference Logical Port Profile Table A-23 Physical Port Profile (continued) Attributes Acceptable Values Access Password [c4_accpasswd] Text (32) Default Values The IOS account password for the NRP/NRP2 associated with this port. W Enable Password [c4_enablepasswd] Text (32) IOS enable password for the NRP/NRP2 associated with the physical port. NRP IP Address [srmgmtaddress] Text (15) This the IP address for the NRP card.
Appendix A Attribute Reference Logical Port Profile Table A-24 Logical Port Profile (continued) Attributes Acceptable Values Signalling Role [srsignallingrole] Enum (3) "DTE" "DCE" A DCE logical port represents the "network side" equipment. This logical port type supports all types of PVCs. A DTE is almost identical to the DCE logical port except for SVC applications. It assumes the role of the "user side" of the UNI signalling interface.
Appendix A Attribute Reference Logical Port Profile Table A-24 Logical Port Profile (continued) Attributes Acceptable Values Multiple Fabric Ranges [sremultirange] Bool (5) Default Values Indicates if there are multiple fabric ranges for the logical port. W Multiple Reserved Ranges [srmultiresrange Bool (5) Indicated if there are multiple reserved ranges for the logical port.
Appendix A Attribute Reference Logical Port Profile Table A-24 Logical Port Profile (continued) Attributes Acceptable Values Default Values Bandwidth Incoming Maximum (kbits/s) [sraz_bandwidth] The maximum incoming bandwidth for the logical port. W Nominal Threshold (%) [sraz_cbnt] Specify the incoming committed bandwidth nominal threshold percentage.
Appendix A Attribute Reference Cross Connection Profile Table A-24 Logical Port Profile (continued) Attributes Acceptable Values Host Name [c4_hostname] Text (32) Default Values The host name for the NRP/NRP2 associated with the logical port. M|R IOS Version [c4_iosversion] Text (32) Specifies the IOS version being used. M|R Maximum Internal Connections [c4_maxintpvcs] Numb (10) Range=0-214748364 Specifies the maximum number of internal connections for the logical 7 port.
Appendix A Attribute Reference Cross Connection Profile Table A-25 Cross Connection Profile (continued) Attributes Acceptable Values Recovery Priority [srpriority] Numb (10) Range=0-214748364 This is the recovery priority for NNI resiliency.The lower the value, the 7 higher the priority; 0 having infinitely low priority, and 1 having the highest priority. Default Values 0 M UNI Recovery Priority [srunipriority] Numb (10) Range=0-214748364 This is the recovery priority for UNI resiliency.
Appendix A Attribute Reference Cross Connection Profile Table A-25 Cross Connection Profile (continued) Attributes Acceptable Values Default Values Sustainable Cell Rate (cells/s) [raaz_scr] SCR is the maximum average cell transmission rate that is allowed over a given period of time on a given circuit. It allows the network to allocate sufficient resources for guaranteeing the network performance objectives are met.
Appendix A Attribute Reference Cross Connection Profile Table A-25 Cross Connection Profile (continued) Attributes Acceptable Values Default Values Numb (10) Range=0-214748364 7 0 Numb (10) Range=0-214748364 MBS is the maximum number of cells that can be received at the PCR. This allows a burst of cells to arrive at a rate higher than the SCR. If 7 the burst is larger than anticipated, the additional cells are either tagged or dropped. This parameter applies only to VBR traffic.
Appendix A Attribute Reference NRP Internal PVC Profile Table A-25 Cross Connection Profile (continued) Attributes Acceptable Values Default Values 6400 NSP Specific A to Z Usage Parameter Control [c4az_upc] This is the usage parameter control type. Cast Type [c4az_cast] This is the cast type. Enum (4) pass, tag, drop, none Enum (9) p2mp-leaf, p2mp-root, p2p, none Z to A Usage Parameter Control [c4za_upc] This is the usage parameter control type. Cast Type [c4za_cast] This is the cast type.
Appendix A Attribute Reference NRP Internal PVC Profile Table A-26 NRP Internal PVC Profile (continued) Attributes Acceptable Values Default Values CNX Type [c4_type] Enum (11) "subscriber" Specify the connection type. This attribute is used to determine what function the internal PVC will have. An NRP/NRP2 internal PVC can "service" serve several roles.
Appendix A Attribute Reference NRP Internal PVC Profile Table A-26 NRP Internal PVC Profile (continued) Attributes Acceptable Values Default Values PCR [c4_pcr] Numb (10) Range=0-214748364 7 365566 Numb (10) Range=0-214748364 7 0 Numb (10) Range=0-214748364 7 0 Numb (10) Range=0-214748364 7 0 PCR is the maximum allowed cell transmission rate.