User's Manual

2-108
Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01
Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
webvpn policy tcp
webvpn policy tcp
To enter the proxy policy TCP configuration submode, use the webvpn policy tcp command. In
proxy-policy TCP configuration submode, you can define the TCP policy templates.
webvpn policy tcp tcp-policy-name
Syntax Description
Defaults The defaults are as follows:
• buffer-share rx is 32768 bytes.
• buffer-share tx is 32768 bytes.
• delayed-ack-threshold is 2 packets.
• delay-ack-timeout is 200 milliseconds.
• mss is 1460 bytes.
• nagle is enabled.
• timeout inactivity is 600 seconds.
• timeout fin-wait is 600 seconds.
• timeout syn is 75 seconds.
• timeout reassembly is 60 seconds.
• tos carryover is disabled.
Command Modes Global configuration
Command History
Usage Guidelines After you define the TCP policy, you can associate the TCP policy with a proxy server using the
proxy-policy TCP configuration submode commands.
Each proxy-policy TCP configuration submode command is entered on its own line.
Table 2-11 lists the commands that are available in proxy-policy TCP configuration submode.
tcp-policy-name TCP policy name.
Release Modification
WebVPN Module
Release 1.1
Support for this command was introduced on the Catalyst 6500 series
switches.
Table 2-11 Proxy-policy TCP Configuration Submode Command Descriptions
default Sets a command to its default settings.
exit Exits from proxy-service configuration submode.