User's Manual

2-13

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto pki authenticate

To obtain the certificate that contains the public key of the certificate authority, use the crypto pki

authenticate command.

crypto pki authenticate trustpoint-label

Syntax Description

Defaults This command has no default settings.

Command Modes Global configuration

Command History

Usage Guidelines The trustpoint-label argument is case-sensitive.

For each trustpoint, you must obtain a certificate that contains the public key of the certificate authority;

multiple trustpoints can use the same certificate authority.

Note Contact the certificate authority to obtain the correct fingerprint of the certificate and verify the

fingerprint displayed on the console.

Examples This example shows how to obtain the certificate of the certificate authority:

webvpn(config)# crypto pki authenticate PROXY1

Certificate has the following attributes:

Fingerprint: A8D09689 74FB6587 02BFE0DC 2200B38A

% Do you accept this certificate? [yes/no]: y

Trustpoint CA certificate accepted.

webvpn(config)# end

webvpn#

trustpoint-label Name of the trustpoint label.

Release Modification

WebVPN Module

Release 1.1

Support for this command was introduced on the Catalyst 6500 series

switches.