User's Manual

2-21

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto pki import pem

To import a PEM-formatted file to the WebVPN Services Module, use the crypto pki import pem

command.

crypto pki import trustpoint_label pem [exportable] {terminal | url url | usage-keys}

pass_phrase

Syntax Description

Defaults This command has no default settings.

Command History Global configuration

Command History

trustpoint-label Name of the trustpoint.

exportable (Optional) Specifies the key that can be exported.

terminal Displays the request on the terminal.

url url Specifies the URL location. Valid values for url are as follows:

• archive:—Imports from archive: file system.

• flash:—Imports from flash: file system.

• ftp:—Imports from the FTP: file system.

• http:—Importsfrom HTTP: file system.

• https:—Imports from HTTPS: file system.

• null:—Imports from the NULL: file system.

• nvram:—Imports from the NVRAM: file system.

• rcp:—Imports from the RCP: file system.

• scp:—Imports from the SCP: file system.

• system:—Imports from the system: file system.

• tftp:—Imports from the TFTP: file system.

usage-keys Specifies that two special-usage key pairs should be generated, instead of

one general-purpose key pair.

pass_phrase Pass phrase.

Release Modification

WebVPN Services

Module Release 1.1

Support for this command was introduced on the Catalyst 6500 series

switches.