User's Manual

2-26

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

crypto pki trustpoint

To enter the configuration submode for the certificate-authority trustpoint and define the

certificate-authority trustpoint, use the crypto pki trustpoint command. Use the no form of this

command to remove any commands that you have entered in the WebVPN subcommand mode from the

configuration.

crypto pki trustpoint trustpoint-label

no crypto pki trustpoint trustpoint-label

Syntax Description

Defaults This command has no default settings.

Command Modes Global configuration

Command History

Usage Guidelines The trustpoint-label argument is case-sensitive.

After you enter the crypto pki trustpoint command, the prompt changes to the following:

webvpn(ca-trustpoint)#

After you enter the ca-trustpoint submode, there are commands available to configure the CA trustpoint.

Table 2-1 lists the ca-trustpoint submode commands.

trustpoint-label (Optional) Name of the trustpoint label.

Release Modification

WebVPN Module

Release 1.1

Support for this command was introduced on the Catalyst 6500 series

switches.