User's Manual

2-28
Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01
Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
crypto pki trustpoint
enrollment [http-proxy][mode ra] [retry
{period minutes | count count} ] url url
Specifies the enrollment parameters for your
certificate authority as follows:
• http-proxy—HTTP proxy server for
enrollment.
• mode ra—Registration authority mode.
• retry count count— How many times to poll
the CA for the certificate; valid values for
count are 1 to 100.
• retry period minutes—How long to wait
between requests to the CA for the certificate;
valid values for minutes are 1 to 60.
• url url—A URL or one of the following:
– archive:—Enrolls using archive: file
system.
– flash:—Enrolls using flash: file system.
– ftp:—Enrolls using ftp: file system.
– http:—Enrolls using http: file system.
– https:—Enrolls using https: file system.
– null:—Enrolls using null: file system.
– nvram:—Enrolls using nvram: file
system.
– rcp:—Enrolls using rcp: file system.
– scp:—Enrolls using scp: file system.
– system:—Enrolls using system: file
system.
– tftp:—Enrolls using tftp: file system.
period minutes—1
count count—10
exit Exits the ca-trustpoint configuration mode.
fqdn {fqdn | none} Includes the fully qualified domain name.
fqdn—Enter the fully qualified domain name.
none—Do not include the fully qualified domain
name.
ip-address server-ip-addr (Optional) Specifies the IP address of the
WebVPN gateway that will use this certificate.
Table 2-1 Certificate-Authority Trustpoint Submode Commands (continued)
Command Purpose and Guidelines Defaults