User's Manual

2-33
Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01
Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
debug webvpn
The platform pc includes the following values:
– module [module]—Module to be debugged
The platform pki includes the following values:
– auth—Certificate authentication and authorization
– ca-pool—CA Pool
– cert—Certificate management
– events—Events
– history—Certificate history
– ipc—IPC messages and buffers
– key—Key management
The platform remote includes the following values:
– loop count [module [module]]—Remote debug. Valid values for count are from 1 to 65535.
– module [module]—Module to be debugged
The platform ssl keyword includes the following values:
– alert [module [module]]—SSL alert events
– error [module [module]]—SSL error events
– handshake [module [module]]—SSL handshake events
– module [module]—Module to be debugged
– pkt [module [module]]—Debugs the received and transmitted SSL packets
Note Use the TCP debug commands only to troubleshoot basic connectivity issues under little or no
load conditions (for instance, when no connection is being established to the virtual server or
real server).
If you run TCP debug commands, the TCP module displays large amounts of debug information
on the console, which can significantly slow down module performance. Slow module
performance can lead to delayed processing of TCP connection timers, packets, and state
transitions.
The platform tcp keyword includes the following values:
– events [module [module]]—Debugs the TCP events.
– module [module]—Module to be debugged.
– pkt [module [module]]—Debugs the received and transmitted TCP packets.
– state [module [module]]—Debugs the TCP states.
– timers [module [module]]—Debugs the TCP timers.
The platform tunnel keyword includes the following values:
– hash—Tunnel hash entry
– trace—Trace packets for tunnel connection