User's Manual

2-36
Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01
Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
nbns-list
nbns-list
To enter the nbnslist submode and configure NetBIOS Name Service (NBNS) servers, use the nbns-list
command. Use the no form of this command to remove the specified list from the configuration.
nbns-list name
no nbns-list name
Syntax Description
Defaults This command has no default settings.
Command Modes WebVPN context submode
Command History
Usage Guidelines The listname argument is case-sensitive and can be a maximum of 64 characters.
After you enter the nbns-list command, the prompt changes to the following:
webvpn(config-webvpn-nbnslist)#
After you enter the nbnslist submode, there are commands available to configure the NBNS servers.
Table 2-4 lists the nbnslist submode commands.
name Name for the NBNS list.
Release Modification
WebVPN Module
Release 1.1
Support for this command was introduced on the Catalyst 6500 series
switches.