User's Manual

2-43

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

show webvpn context

To display information about a specific context, use the show webvpn context command.

show webvpn context name

Syntax Description

Defaults This command has no default settings.

Command Modes EXEC

Command History

Examples This example shows how to collect information about the software-forced reset:

webvpn# show web context tunnel

Admin Status: up

Operation Status: up

TCP Policy not configured

SSL Policy not configured

Certificate authentication type: peer certificate is always accepted

AAA Authentication List: webvpn

AAA Authentication Domain not configured

Default Group Policy: tunnel

Associated WebVPN Gateway: s2

Domain Name and Virtual Host not configured

Maximum Users Allowed: 2560 (default)

NAT Address Range: 10.81.12.4-10.81.12.9 mask 255.255.255.0

VRF Name not configured

webvpn#

name Specifies the name of the context.

Release Modification

WebVPN Module

Release 1.1

Support for this command was introduced on the Catalyst 6500 series

switches.