User's Manual

2-46

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

show webvpn gateway

To display gateway information, use the show webvpn gateway command.

show webvpn gateway [name]

Syntax Description

Defaults This command has no default settings.

Command Modes EXEC

Command History

Examples This example shows how to display information for all gateways:

webvpn# show webvpn gateway

Gateway Name Admin Operation

------------ ----- ---------

s1 up up

s2 up up

gateway1 down down

tunnel down down

This example shows how to display information for a specific gateway:

webvpn# show webvpn gateway s1

Admin Status: up

Operation Status: up

IP: 10.1.2.140, port: 443

TCP Policy not configured

SSL Policy not configured

SSL Trustpoint: tp1

Certificate chain for new connections:

Certificate:

Key Label: tp1, 1024-bit, not exportable

Key Timestamp: 12:09:27 UTC Dec 25 2004

Serial Number: 0FE5

Root CA Certificate:

Serial Number: 01

rsa-general-purpose certificate

Certificate chain complete

name (Optional) Name of the gateway.

Release Modification

WebVPN Module

Release 1.1

Support for this command was introduced on the Catalyst 6500 series

switches.