User's Manual

2-56

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

show webvpn platform gateway

To display gateway information WebVPN, use the show webvpn platform gateway command.

show webvpn platform gateway name [debug | module module]

Syntax Description

Defaults This command has no default settings.

Command Modes EXEC

Command History

Examples This example shows how to display status information for a specific gateway:

webvpn# show webvpn platform gateway tunnel

IP: 10.1.2.14, port: 443

rsa-general-purpose certificate trustpoint: mytp

Certificate chain for new connections:

Certificate:

Key Label: mytp, 1024-bit, not exportable

Key Timestamp: 12:09:27 UTC Dec 25 2004

Serial Number: 0FE5

Root CA Certificate:

Serial Number: 01

Certificate chain complete

Admin Status: up

Operation Status: up

webvpn#

name Name of the gateway.

debug (Optional) Displays debug information for the gateway.

module module (Optional) Valid values for module are as follows:

all—all CPUs

fdu—FDU CPU

ssl1—SSL1 CPU

tcp1—TCP1 CPU

tcp2—TCP2 CPU

Release Modification

WebVPN Module

Release 1.1

Support for this command was introduced on the Catalyst 6500 series

switches.