User's Manual

2-61

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

show webvpn platform vlan

To display VLAN information, use the show webvpn platform vlan command.

show webvpn platform vlan [vlan-id ]

Syntax Description

Defaults This command has no default settings.

Command Modes EXEC

Command History

Examples This example shows how to display all the VLANs that are configured on the WebVPN Services Module:

webvpn# show webvpn platform vlan

Vlan-id IP address NetMask VRF

------- ---------- ------- ------

10 10.81.12.3 255.255.255.0 -

20 20.102.223.139 255.255.255.248 -

This example shows how to display information about a specific VLAN on the WebVPN Services

Module:

webvpn# show webvpn platform vlan 10

Vlan-id IP address NetMask VRF

------- ---------- ------- ------

10 10.81.12.3 255.255.255.0 -

------ FDU module info ----

FDU Vlan Entry

VLAN ID : 10

My IP Addr : 10.81.12.3

My Net Mask : 255.255.255.0

VRF ID : 0

vlan-id (Optional) VLAN ID. Displays information for a specific VLAN; valid

values are from 2 to 1005.

Release Modification

WebVPN Services

Module Release 1.1

Support for this command was introduced on the Catalyst 6500 series

switches.