User's Manual

2-64
Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01
Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
show webvpn stats
show webvpn stats
To display information about the statistics counter, use the show webvpn stats command.
show webvpn stats [type]
Syntax Description
Defaults This command has no default settings.
Command Modes EXEC
Command History
Usage Guidelines The valid options for type are as follows:
• cifs [detail][context {name | all}]
• context {name | all}
• detail [context {name | all}]
• mangle [detail][context {name | all}]
• port-forward [detail][context {name | all}]
• socket [detail][context {name | all}]
• tunnel [detail][context {name | all}]
Examples This example shows how to display all the statistics counters that are collected on the WebVPN Services
Module:
webvpn# show webvpn stats
User session statistics:
Active user sessions : 1 AAA pending reqs : 0
Peak user sessions : 6 Peak time : 17:22:16
Active user TCP conns : 2 Terminated user sessions : 29
Session alloc failures : 0 Authentication failures : 3
VPN session timeout : 1 VPN idle timeout : 9
User cleared VPN sessions: 0 Exceeded ctx user limit : 0
Exceeded total user limit: 0
type (Optional) See the “Usage Guidelines” section for additional information.
Release Modification
WebVPN Services
Module Release 1.1
Support for this command was introduced on the Catalyst 6500 series
switches.