User's Manual

2-71
Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01
Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
snmp-server enable
snmp-server enable
To configure the SNMP traps and informs, use the snmp-server enable command. Use the no form of
this command to disable SNMP traps and informs.
[no] snmp-server enable {informs | traps {ipsec | isakmp | snmp | tty}}
Syntax Description
Defaults This command has no default setting.
Command Modes Global configuration
Command History
Usage Guidelines The ipsec keyword has the following options:
• ipsec crptomap {add | attach | delete | detach}
• ipsec too-many-sas
• ipsec tunnel {start | stop}
The isakmp keyword has the following options:
• isakmp {policy {add | delete} | tunnel {start | stop}}
The snmp keyword has the following options:
• snmp [authentication | coldstart | linkdown | linkup | warmstart]
informs Enables SNMP informs.
traps Enables SNMP traps.
ipsec Enables IPSec traps. See the “Usage Guidelines” section for additional
options.
isakmp Enables ISAKMP traps. See the “Usage Guidelines”section for additional
options.
snmp Enables SNMP traps. See the “Usage Guidelines” section for additional
options.
tty Enables TCP connection traps.
Release Modification
SSL Services Module
Release 2.1(1)
Support for this command was introduced on the Catalyst 6500 series
switches.