User's Manual

2-74
Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01
Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
svc
dpd-interval {client timeout} |
{gateway timeout}
Specifies the dead peer detection (DPD) timeout values for
the gateway or the client, if tunnel-mode WebVPN is
enabled for the user or group. The DPD timer is used to
determine if a DPD packet needs to be sent to the peer. The
DPD timer is reset every time a Cisco SSL Tunnel Protocol
(CSTP) frame is received from the peer.
gateway timeout—Specifies the DPD timeout values for
the SG; valid values are from 0 (disabled) to 3600 seconds.
client timeout—Specifies the DPD timeout values for the
client; valid values are from 0 (disabled) to 3600 seconds.
Disabled for the
gateway and the
client.
homepage url Configures the URL of the web page to be displayed to the
user upon login. The URL string specifies the path of the
URL. The maximum length for the URL string is 255
characters. Entering the no form of this command removes
the command from the configuration.
No web page is
specified.
keep-client-installed Keeps the SVC installed after the connection is closed.
msie-proxy exception {ip-address |
dns-name}
Specifies the Microsoft Internet Explorer (MSIE) browser
proxy settings.
Note This command is supported only with the MSIE
browser.
The exception keyword specifies a single DNS name or IP
address for traffic that is not sent through a proxy.
Disabled.
msie-proxy server {ip-address |
dns_name}[: port]
Specifies the Microsoft Internet Explorer (MSIE) browser
proxy settings.
Note This command is supported only with the MSIE
browser.
The server keyword specifies an IP address or DNS name,
optionally followed by a colon and port number, that is used
by all the proxy settings in the browser (HTTP, Secure, FTP,
Gopher) except Socks.
Disabled.
msie-proxy option {auto | bypass-local
| none}
Specifies the Microsoft Internet Explorer (MSIE) browser
proxy settings.
Note This command is supported only with the MSIE
browser.
The option none keyword specifies that the browser does
not use a proxy.
The option auto keyword specifies that the browser proxy
settings are automatically detected.
The option bypass-local keyword specifies that the local
addresses bypass the proxy.
option none
Table 2-5 Tunnel-Mode Configuration Commands (continued)
Command Purpose and Guidelines Default