User's Manual

2-78

Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1

OL-7310-01

Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module

webvpn context

To enter the WebVPN context submode and define the virtual WebVPN context, use the webvpn context

command. Use the no form of this command to remove any commands that you have entered in the

WebVPN subcommand mode from the configuration.

webvpn context [vpn-name]

no webvpn context vpn-name

Syntax Description

Defaults This command has no default settings.

Command Modes Global configuration

Command History

Usage Guidelines The vpn-name argument is case-sensitive.

After you enter the webvpn context command, the prompt changes to the following:

webvpn(config-webvpn-context)#

After you enter the context submode, there are commands available to configure the context services.

Table 2-7 lists the virtual context submode commands.

vpn-name (Optional) Name of the WebVPN instance.

Release Modification

WebVPN Module

Release 1.1

Support for this command was introduced on the Catalyst 6500 series

switches.

Table 2-7 Virtual WebVPN Context Submode Commands

Command Purpose and Guidelines Defaults

aaa authentication {{domain domain-list} |

{list listname}}

Specifies AAA configuration parameters for context.

• domain domain-list—Specifies the name of the

domain used for authentication.

• list listname—Specifies the name of the

authentication list.

default-group-policy default-policy-name Specifies the default group policy that the virtual

WebVPN context instance uses. See the policy

group command for information on group policies.

exit Exits from the context submode and returns to the

global configuration mode.