User's Manual

2-79
Catalyst 6500 Series Switch WebVPN Module Command Reference—Release 1.1
OL-7310-01
Chapter 2 Commands for the Catalyst 6500 Series Switch WebVPN Module
webvpn context
gateway gateway-name {{domain-name
domain-name} | {virtual-host hostname}}
Specifies the corresponding virtual gateway instance
configured on the secure gateway and the mapping
methods (for example, IP address, URL, and domain
name) as follows:
• gateway-name—Name of the virtual gateway
configured on the system.
• domain-namedomain-name—(Optional) Maps
to a specific domain name. The domain-name
argument is a ASCII string, which is used to
specify a corporate-specific domain name (for
example, cisco.com) for the virtual WebVPN
instance.
• virtual-host hostname—(Optional) Maps to a
specific virtual host.
Virtualization is
performed
through a unique
IP address.
inservice Brings context to inservice.
login-message string
no login-message
Specifies the text that prompts the user to login.
Limited to 255 characters. Use the no form of this
command to return to the default setting.
string is Please
enter your
username and
password.
logo [file filename | none] Specifies the custom logo image that is displayed on
the login and home pages.
file filename—(Optional) Specifies the filename of a
file that is uploaded by the administrator to the
security gateway.
nat-address start-address end-address
{netmask netmask}
Specifies the NAT addresses to be used in opening a
server connection. The addresses specified in the
nat-address command must match one of the
subnets configured on the WebVPN subinterfaces.
• start-address—Starting IP address that defines
the range of addresses in the address pool.
• end-address—Ending IP address that defines
the range of addresses in the address pool.
• netmask netmask—Network mask that
indicates which address bits belong to the
network and subnetwork fields and which bits
belong to the host field. Specify the netmask of
the network to which the pool addresses belong.
nbns-list name Enters nbmslist submode and allows you to create
the NBNS list name. See the nbns-list command for
information on configuring the NBNS list.
password-prompt prompt Configures the initial WebVPN login password
prompt. The maximum length of prompt is 16
characters.
prompt is
Password:
Table 2-7 Virtual WebVPN Context Submode Commands
Command Purpose and Guidelines Defaults