Server Fabric Switches Regulatory Compliance and Safety Information
Table Of Contents
- Regulatory Compliance and Safety Information for the Cisco Server Fabric Switches: 7000D, 7000P, 7008P, 7012, 7024, 3012R, and 3504
- Working with Lasers
- Translated Safety Warnings
- Statement 5-Chassis Lifting Warning
- Statement 94-Wrist Strap Warning
- Statement 166-Backplane Voltage Warning
- Statement 181-Wrist Strap and Midplane Contact Warning
- Statement 258-Fan Tray Removal Warning
- Statement 1004-Installation Instructions
- Statement 1006-Chassis Warning for Rack-Mounting and Servicing
- Statement 1017-Restricted Area
- Statement 1024-Ground Conductor
- Statement 1028-More Than One Power Supply
- Statement 1029-Blank Faceplates and Cover Panels
- Statement 1030-Equipment Installation
- Statement 1034-Backplane Voltage
- Statement 1040-Product Disposal
- Statement 1043-Installation Hazard
- Statement 1045-Short-circuit Protection
- Statement 1053-Class 1M Laser Radiation
- Statement 1055-Class I and Class 1M Laser
- Statement 1056-Unterminated Fiber Cable
- Statement 1057-Hazardous Radiation Exposure
- Statement 1071-Warning Definition
- Statement 1073-No User-Serviceable Parts
- European Directives
- California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33)
- Regulatory Standards Compliance
- EMC Environmental Conditions for Products Installed in the European Union
- EMC Class A Notices and Warnings
- Japanese Electric Appliance and Radio Laws
- Related Documentation
- Obtaining Documentation and Submitting a Service Request

25
Regulatory Compliance and Safety Information for the Cisco Server Fabric Switches: 7000D, 7000P, 7008P, 7012, 7024, 3012R, and 3504
78-17786-05
Translated Safety Warnings
Statement 1028—More Than One Power Supply
Warning
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit.
Waarschuwing
Deze eenheid kan meer dan één stroomtoevoeraansluiting bevatten. Alle aansluitingen dienen
ontkoppeld te worden om de eenheid te ontkrachten.
Varoitus
Tässä laitteessa voi olla useampia kuin yksi virtakytkentä. Kaikki liitännät on irrotettava, jotta
jännite poistetaan laitteesta.
Attention
Cette unité peut avoir plus d'une connexion d'alimentation. Pour supprimer toute tension et tout
courant électrique de l'unité, toutes les connexions d'alimentation doivent être débranchées.
Warnung
Dieses Gerät kann mehr als eine Stromzufuhr haben. Um sicherzustellen, dass der Einheit kein Strom
zugeführt wird, müssen alle Verbindungen entfernt werden.
Avvertenza
Questa unità può avere più di una connessione all'alimentazione elettrica. Tutte le connessioni
devono essere staccate per togliere la corrente dall'unità.
Advarsel
Denne enheten kan ha mer enn én strømtilførselskobling. Alle koblinger må fjernes fra enheten for
å utkoble all strøm.
Aviso
Esta unidade poderá ter mais de uma conexão de fonte de energia. Todas as conexões devem ser
removidas para desligar a unidade.
¡Advertencia!
Puede que esta unidad tenga más de una conexión para fuentes de alimentación. Para cortar por
completo el suministro de energía, deben desconectarse todas las conexiones.
Varning!
Denna enhet har eventuellt mer än en strömförsörjningsanslutning. Alla anslutningar måste tas bort
för att göra enheten strömlös.