Server Fabric Switches Regulatory Compliance and Safety Information
Table Of Contents
- Regulatory Compliance and Safety Information for the Cisco Server Fabric Switches: 7000D, 7000P, 7008P, 7012, 7024, 3012R, and 3504
- Working with Lasers
- Translated Safety Warnings
- Statement 5-Chassis Lifting Warning
- Statement 94-Wrist Strap Warning
- Statement 166-Backplane Voltage Warning
- Statement 181-Wrist Strap and Midplane Contact Warning
- Statement 258-Fan Tray Removal Warning
- Statement 1004-Installation Instructions
- Statement 1006-Chassis Warning for Rack-Mounting and Servicing
- Statement 1017-Restricted Area
- Statement 1024-Ground Conductor
- Statement 1028-More Than One Power Supply
- Statement 1029-Blank Faceplates and Cover Panels
- Statement 1030-Equipment Installation
- Statement 1034-Backplane Voltage
- Statement 1040-Product Disposal
- Statement 1043-Installation Hazard
- Statement 1045-Short-circuit Protection
- Statement 1053-Class 1M Laser Radiation
- Statement 1055-Class I and Class 1M Laser
- Statement 1056-Unterminated Fiber Cable
- Statement 1057-Hazardous Radiation Exposure
- Statement 1071-Warning Definition
- Statement 1073-No User-Serviceable Parts
- European Directives
- California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33)
- Regulatory Standards Compliance
- EMC Environmental Conditions for Products Installed in the European Union
- EMC Class A Notices and Warnings
- Japanese Electric Appliance and Radio Laws
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
35
Regulatory Compliance and Safety Information for the Cisco Server Fabric Switches: 7000D, 7000P, 7008P, 7012, 7024, 3012R, and 3504
78-17786-05
Translated Safety Warnings
Statement 1043—Installation Hazard
Warning
This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260.
Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The
telecommunications lines must be disconnected 1) before unplugging the main power connector or
2) while the housing is open, or both.
Waarschuwing
Deze apparatuur dient geïnstalleerd en onderhouden te worden door onderhoudspersoneel zoals
gedefinieerd door AS/NZS 3260. Als deze uitrusting onjuist op een stopcontact voor algemeen
gebruik wordt aangesloten, kan dit gevaarlijk zijn. De telecommunicatielijnen dienen ontkoppeld te
worden 1) voordat de stekker naar de hoofdstroomtoevoer eruit genomen wordt of 2) terwijl de
behuizing open is, of in beide gevallen.
Varoitus
Huoltohenkilöstön on asennettava ja huollettava tämä laite AS/NZS 3260:n määräysten mukaisesti.
Laitteen virheellinen kytkeminen yleispistorasiaan voi aiheuttaa vaaratilanteen.
Tietoliikennejohdot on irrotettava 1) ennen kuin päävirtaliitin irrotetaan pistorasiasta ja/tai 2) kun
kotelo on auki.