Server Fabric Switches Regulatory Compliance and Safety Information
Table Of Contents
- Regulatory Compliance and Safety Information for the Cisco Server Fabric Switches: 7000D, 7000P, 7008P, 7012, 7024, 3012R, and 3504
- Working with Lasers
- Translated Safety Warnings
- Statement 5-Chassis Lifting Warning
- Statement 94-Wrist Strap Warning
- Statement 166-Backplane Voltage Warning
- Statement 181-Wrist Strap and Midplane Contact Warning
- Statement 258-Fan Tray Removal Warning
- Statement 1004-Installation Instructions
- Statement 1006-Chassis Warning for Rack-Mounting and Servicing
- Statement 1017-Restricted Area
- Statement 1024-Ground Conductor
- Statement 1028-More Than One Power Supply
- Statement 1029-Blank Faceplates and Cover Panels
- Statement 1030-Equipment Installation
- Statement 1034-Backplane Voltage
- Statement 1040-Product Disposal
- Statement 1043-Installation Hazard
- Statement 1045-Short-circuit Protection
- Statement 1053-Class 1M Laser Radiation
- Statement 1055-Class I and Class 1M Laser
- Statement 1056-Unterminated Fiber Cable
- Statement 1057-Hazardous Radiation Exposure
- Statement 1071-Warning Definition
- Statement 1073-No User-Serviceable Parts
- European Directives
- California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33)
- Regulatory Standards Compliance
- EMC Environmental Conditions for Products Installed in the European Union
- EMC Class A Notices and Warnings
- Japanese Electric Appliance and Radio Laws
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
59
Regulatory Compliance and Safety Information for the Cisco Server Fabric Switches: 7000D, 7000P, 7008P, 7012, 7024, 3012R, and 3504
78-17786-05
Japanese Electric Appliance and Radio Laws
Japanese Electric Appliance and Radio Laws
This section applies to switches installed in Japan.
Statement 371—Power Cable and AC Adapter
Related Documentation
Refer to the following documents for additional information about the Cisco SFS 7000D, SFS 7000P,
SFS 7008P, SFS 7012, SFS 7024, SFS 3012R, and SFS 3504 Server Switches:
• Cisco SFS 7000D InfiniBand Server Switch Installation and Configuration Note
• Cisco SFS 7000P and SFS 7000D InfiniBand Server Switches Hardware Installation Guide
• Cisco SFS 7000P InfiniBand Server Switch Installation and Configuration Note
• Cisco SFS 7008P InfiniBand Server Switch Hardware Installation Guide
• Cisco SFS 7008P InfiniBand Server Switch Installation and Configuration Note
• Cisco SFS 7012 InfiniBand Server Switch Hardware Installation Guide
• Cisco SFS 7024 InfiniBand Server Switch Hardware Installation Guide
• Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide
• Cisco SFS 3012R Multifabric Server Switch Installation and Configuration Note
• Cisco SFS 3504 Multifabric Server Switch Hardware Installation Guide
• Cisco SFS 3504 Multifabric Server Switch Installation and Configuration Note
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional
information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and
revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed
and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free
service and Cisco currently supports RSS version 2.0.