Server Fabric Switches Regulatory Compliance and Safety Information
Table Of Contents
- Regulatory Compliance and Safety Information for the Cisco Server Fabric Switches: 7000D, 7000P, 7008P, 7012, 7024, 3012R, and 3504
- Working with Lasers
- Translated Safety Warnings
- Statement 5-Chassis Lifting Warning
- Statement 94-Wrist Strap Warning
- Statement 166-Backplane Voltage Warning
- Statement 181-Wrist Strap and Midplane Contact Warning
- Statement 258-Fan Tray Removal Warning
- Statement 1004-Installation Instructions
- Statement 1006-Chassis Warning for Rack-Mounting and Servicing
- Statement 1017-Restricted Area
- Statement 1024-Ground Conductor
- Statement 1028-More Than One Power Supply
- Statement 1029-Blank Faceplates and Cover Panels
- Statement 1030-Equipment Installation
- Statement 1034-Backplane Voltage
- Statement 1040-Product Disposal
- Statement 1043-Installation Hazard
- Statement 1045-Short-circuit Protection
- Statement 1053-Class 1M Laser Radiation
- Statement 1055-Class I and Class 1M Laser
- Statement 1056-Unterminated Fiber Cable
- Statement 1057-Hazardous Radiation Exposure
- Statement 1071-Warning Definition
- Statement 1073-No User-Serviceable Parts
- European Directives
- California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33)
- Regulatory Standards Compliance
- EMC Environmental Conditions for Products Installed in the European Union
- EMC Class A Notices and Warnings
- Japanese Electric Appliance and Radio Laws
- Related Documentation
- Obtaining Documentation and Submitting a Service Request

9
Regulatory Compliance and Safety Information for the Cisco Server Fabric Switches: 7000D, 7000P, 7008P, 7012, 7024, 3012R, and 3504
78-17786-05
Translated Safety Warnings
Warnung
Wenn das System in Betrieb ist, herrscht Spannung auf der Rückwandplatine. Um das Risiko eines
elektrischen Schlags zu verringern, dürfen Hände und Finger nicht in die Anschlußstellen der
Stromversorgung und in den Bereich der Rückwandplatine gesteckt werden.
Avvertenza
Quando il sistema è in funzione, il pannello posteriore è sotto tensione. Onde evitare il rischio di
scosse elettriche, tenere le mani e le dita lontano dalle parti sotto tensione e dall’area del pannello
posteriore.
Advarsel
Spenning er til stede på bakpanelet når systemet kjøres. Hold hender og fingre borte fra
strømforsyningsåpningene og bakpanelområdet.
Aviso
Existem tensões na placa traseira quando o sistema está a operar. Para reduzir o risco de choque
eléctrico, mantenha as mãos e os dedos fora das baías das fontes de energia e das áreas da placa
traseira.
¡Advertencia!
Cuando el sistema está en funcionamiento el voltaje está presente en el plano trasero. Para reducir
el riesgo de choque eléctrico mantenga las manos y los dedos fuera de los puertos de alimentación
eléctrica y de las áreas del plano trasero.
Varning!
Spänning föreligger på bakplattan när systemet körs. Minska risken för elektriska stötar genom att
hålla händer och fingrar borta från områdena kring strömförsörjningsenhetens fack och bakplattan.
Aviso
Com o sistema em funcionamento, há uma corrente no painel traseiro. Para reduzir o risco de choque
elétrico, não se aproxime dos compartimentos de fonte de alimentação e das áreas do painel
traseiro.
Advarsel
Der er spænding på bagpladen når systemet er i brug. For at reducere risikoen for elektrisk stød, må
strømforsyningspladser og bagpladeområder ikke berøres.