Network Router User Manual
3-110
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
MPLS-LSR-MIB
• mplsInSegmentOperStatus Always up(1).
• mplsInSegmentNPop Read-only.
• mplsInSegmentAddrFamily Read-only.
• mplsInSegmentOwner Read-only. Other(1)
• mplsInSegmentTrafficParamPtr Read-only. Always 0.
• mplsInSegmentRowStatus Read-only. Active(5).
• mplsInSegmentStorageType Read-only(5).
mplsInSegmentPerfTable
•
mplsInSegmentOctets Read-only. Always 0.
• mplsInSegmentPackets Read-only. Always 0.
• mplsInSegmentHCOctets Read-only. Always 0.
• mplsInSegmentErrors Read-only. Always 0.
• mplsInSegmentDiscards Read-only. Always 0.
mplsOutSegmentTable
•
mplsOutSegmentifIndex Read-only.
• mplsOutSegmentPushTopLabel Read-only. Always False(2).
• mplsOutSegmentTopLabel Read-only.
• mplsOutSegmentNextHopIpAddrType Read-only.
• mplsOutSegmentNextHopIpv4Addr Read-only. Always ipv4(1).
• mplsOutSegmentNextHopIpv6Addr Read-only. Always 0.
• mplsOutSegmentOwner Read-only. Other(1).
• mplsOutSegmentTrafficParamPtr Read-only. Always 0.
• mplsOutSegmentRowStatus Read-only. Active(5).
• mplsOutSegmentStorageType ReadOnly(5).
• mplsOutSegmentAdminStatus Read-only. Always up(1).
• mplsOutSegmentOperStatus Always up(1).
mplsOutSegmentPerfTable
•
mplsOutSegmentOctets Read-only. Always 0.
• mplsOutSegmentPackets Read-only. Always 0.
• mplsOutSegmentHCOctets Read-only. Always 0.
• mplsOutSegmentErrors Read-only. Always 0.
• mplsOutSegmentDiscards Read-only. Always 0.
• mplsOutSegmentPerfDiscontinuityTime Read-only. Always 0.
mplsXCTable
•
mplsXCLspId Read-only. Does not support tunnel IDs.
Table 3-33 MPLS-LSR-MIB Constraints (continued)
MIB Object Notes