Network Router User Manual

3-78
Cisco 7600 Series Router MIB Specifications Guide
OL-4077-07
Chapter 3 Cisco 7600 MIB Specifications
CISCO-ERM-MIB
F
CISCO-ENVMON-MIB Usage
The command show environment can be used to check environmental status through the CLI. The
objects defined in ciscoEnvMonMIBNotificationEnables can be set to true using CLI command
snmp-server enable traps environment.
CISCO-ERM-MIB
The CISCO-ERM-MIB is for the Embedded Resource Manager (ERM framework which helps in
effectively managing resources such as cpu, memory, buffers, etc).
CISCO-ETHER-CFM-MIB
The CISCO-ETHER-CFM-MIB defines the managed objects and notifications for Ethernet Connectivity
Fault Management (CFM). CFM is an end-to-end per service instance Ethernet layer Operations,
Administration and Management (OAM) protocol.
CISCO-FLASH-MIB
The CISCO-FLASH-MIB contains objects to manage flash cards and flash-card operations.
CISCO-FLEX-LINKS-MIB
The CISCO-FLEX-LINKS-MIB is for configuration and status query of Flex Links feature on the Cisco
device.
Flex Links are a pair of a Layer 2 interfaces, where one interface is configured to act as a backup to the
other. The feature provides an alternative solution to the Spanning Tree Protocol (STP), allowing users
to turn off STP and still provide basic link redundancy.
Table 3-21 CISCO-ENVMON-MIB Constraints
MIB Object Notes
ciscoEnvMonVoltageStatusTable
•
ciscoEnvMonVoltageStatusDescr Not implemented.
• ciscoEnvMonVoltageStatusValue Not implemented.
• ciscoEnvMonVoltageThresholdLow Not implemented.
• ciscoEnvMonVoltageThresholdHigh Not implemented.
• ciscoEnvMonVoltageLastShutdown Not implemented.
• ciscoEnvMonVoltageState Not implemented.
• ciscoEnvMonEnableVoltageNotification Not implemented.