User Manual
Table Of Contents
- Cisco Unified Wireless IPPhone7921G for CiscoUnified CallManager 4.1, 4.2, 5.0 and Later
- Getting Started
- Connecting Your Phone
- An Overview of Your Phone
- Basic Call Handling
- Advanced Call Handling
- Using a Handset, Headset, and Speakerphone
- Using Phone Settings
- Using Call Logs and Directories
- Accessing Voice Messages
- Accessing Your User Options Web Pages
- Understanding Additional Configuration Options
- Troubleshooting Your Phone
- Cisco One-Year Limited Hardware Warranty Terms
- Index
Connecting Your Phone
Cisco Unified Wireless IP Phone 7921G for Cisco Unified CallManager 4.1, 4.2, 5.0 and Later 7
FINAL REVIEW - Cisco Confidential
Charging the Phone Battery
You can charge the battery in your wireless IP phone by connecting the AC power supply or the USB
cable to your phone. For more information, see these sections:
• Using the AC Power Supply to Charge the Battery, page 8
• Using the USB Cable and PC Port to Charge the Battery, page 9
1
Locking catch—Push up to release the battery.
2
Battery catches—Insert these into the slots near the bottom of the phone at battery installation.
3
Metal contacts—Match the contacts on the battery to the contacts on the phone.
Charging Times
Battery Type
AC Power Supply
Connected to Phone
Phone Connected to
PC with USB Cable
Standard 2 hours 5 hours
Extended 3 hours 7 hours
222
1
3
180349