User Manual

Connecting Your Phone
Cisco Unified Wireless IP Phone 7921G for Cisco Unified CallManager 4.1, 4.2, 5.0 and Later 11
FINAL REVIEW - Cisco Confidential
Setting Username and Passwords
When powering on your phone for the first time, in some networks, you might need to set your
username and password to access the wireless network. Ask your phone administrator for assistance.
Entering and Editing Text
You can enter characters, numbers, and special characters for passwords. When you press a numeric
key on the keypad, a text bubble shows all the characters and symbols that this key controls. Each
press moves to another character option.
If you want to... Then...
Set username and
password
1. Press (Settings).
2. Select Network Profile.
3. Select the current profile name (with ).
Note
icon displays indicating that this screen is locked. For assistance,
contact your phone administrator.
4. Press Change, then select WLAN Configuration.
5. Scroll to Username or Password and press .
6. Using the keypad, enter your username or password in the New
Username or New Password field.
For assistance, see Entering and Editing Text, page 11.
Note
You can use up to 32 alphanumeric characters for the EAP/LEAP
password.
7. To confirm the changes, choose Options > Save.
8. To return to the main screen, press (red button).
If you want to... Then...
Enter characters Press the number key until you highlight the character (lower or upper
case) that you want to enter.
Enter numbers Press the number key and locate the number that you want to enter.
Delete the last character Press << once to delete the last character or number or to delete the
whole character string, press and hold <<.
Enter a space Press to enter a space between characters.
0