User Manual

28 OL-10806-01
FINAL REVIEW - Cisco Confidential
Ending a Call
To end a call, simply disconnect.
Using Hold and Resume
You can hold and resume calls A held call is indicated by the call-on-hold icon in the call view.
If you want to... Then...
End the call Choose (red button), EndCall, or Options > EndCall.
Disconnect one call, but preserve
another call on the same line
Choose EndCall or Options > EndCall. If necessary, remove
the call from hold first.
If you want to... Then...
Put a call on hold 1. Make sure the call you want to put on hold is highlighted.
2. Press Hold.
Note Engaging the Hold feature typically generates music or a beeping
tone.
Remove a call from
hold on the current line
1. Make sure the appropriate call is highlighted.
2. Press Resume.
Remove a call from
hold on a different line
1. Press (Line View) to change to another line.
2. Press Resume.
Note
If a single call is holding on this line, the call automatically resumes. If
another call is holding, scroll to the appropriate call and press Resume.
Move a call on a shared
line to your wireless
phone or to your desk
phone
1. From the phone with the active call on the shared line, press Hold.
2. From your other phone with the shared line, press Resume.