User Manual
Table Of Contents
- Cisco Unified Wireless IPPhone7921G for CiscoUnified CallManager 4.1, 4.2, 5.0 and Later
- Getting Started
- Connecting Your Phone
- An Overview of Your Phone
- Basic Call Handling
- Advanced Call Handling
- Using a Handset, Headset, and Speakerphone
- Using Phone Settings
- Using Call Logs and Directories
- Accessing Voice Messages
- Accessing Your User Options Web Pages
- Understanding Additional Configuration Options
- Troubleshooting Your Phone
- Cisco One-Year Limited Hardware Warranty Terms
- Index
34 OL-10806-01
FINAL REVIEW - Cisco Confidential
Tips
• Calls must be on the same line before you can add them to a conference. If calls are on different
lines, transfer them to a single line before using Confrn or Join.
• Depending on how your phone is configured, if you leave a conference after initiating it, the
conference might end. To avoid this, transfer the conference before hanging up.
Starting or Joining a Meet-Me Conference Call
Meet-Me conferencing allows you to start (initiate) or join a conference by dialing the conference
number.
If you want to... Then...
Start a Meet-Me conference 1. Obtain a Meet-Me phone number from your phone administrator.
2. Distribute the number to participants.
3. When you are ready to start the meeting, choose Options >
MeetMe.
4. Dial the Meet-Me conference number.
5. Press the (green button).
Participants can now join the conference by dialing in.
Note
Participants hear a busy tone if they call the conference before the
initiator has joined. In this case, participants must call back.
Participate in a Meet-Me
conference
1. Dial the Meet-Me conference number (provided by the conference
initiator).
2. Press the (green button).
Note
You will hear a busy tone if you call the conference before the
initiator has joined. In this case, try your call again.
End a Meet-Me conference All participants must hang up.
The conference does not automatically end when the conference
initiator disconnects.