User Manual

42 OL-10806-01
FINAL REVIEW - Cisco Confidential
Logging Out of Hunt Groups
If your organization receives a large number of incoming calls, you might be a member of a hunt group.
A hunt group includes a series of directory numbers that share the incoming call load. When the first
directory number in the hunt group is busy, the system hunts for the next available directory number
in the group and directs the call to that phone. When you are away from your phone, you can prevent
hunt group calls from ringing your phone by logging out of hunt groups.
Tip
Logging out of hunt groups does not prevent non-hunt group calls from ringing your phone.
Using Cisco Extension Mobility
Cisco Extension Mobility (EM) allows you to temporarily configure a Cisco Unified IP Phone as your
own. Once you log in to EM, the phone adopts your user profile, including your phone lines, features,
established services, and web-based settings. Your phone administrator must configure EM for you.
Tips
• EM automatically logs you out after a certain amount of time. This time limit is established by
your phone administrator.
• Changes that you make to your EM profile (from the User Options web pages) take effect the next
time that you log in to EM on a phone.
• Settings that are controlled on the phone only are not maintained in your EM profile.
If you want to... Then...
Log out of hunt groups to
temporarily block hunt group
calls
Choose Options > HLog. Your phone screen displays, “Logged out
of Hunt Group.”
Log in to receive hunt group
calls
Choose Options > HLog.
If you want to... Then...
Log in to EM 1. Choose (Services) > EM Service (name can vary).
2. Enter your user ID and PIN (provided by your phone administrator).
3. If prompted, select a device profile.
Log out of EM 1. Choose (Services) > EM Service (name can vary).
2. When prompted to log out, press Yes.