User Manual

Using Phone Settings
Cisco Unified Wireless IP Phone 7921G for Cisco Unified CallManager 4.1, 4.2, 5.0 and Later 49
FINAL REVIEW - Cisco Confidential
• Using Any Key to Answer the Phone, page 49
• Setting the Keypad to Automatically Lock, page 49
• Changing the Keypad Tones, page 50
Using Any Key to Answer the Phone
You can set your phone to allow the use of any key to answer a call.
Setting the Keypad to Automatically Lock
To keep from pressing keys and redialing calls accidentally, use the keypad auto lock feature. You can
set the length of time before your phone keypad automatically locks after completing a call.
If you want to... Then...
Answer calls by pressing any
key
1. Choose (Settings) > Phone Settings > Keypad Settings.
2. Select Any Key Answer.
3. Select Enable.
4. Press Save to make the change or Cancel.
Note
Under the Any Key Answer option, Enabled displays.
Disable the Any Key Answer
option
1. Choose (Settings) > Phone Settings > Keypad Settings.
2. Select Any Key Answer.
3. Select Disable.
4. Press Save to make the change or Cancel.
Note
Under the Any Key Answer option, Disabled displays.
If you want to... Then...
Automatically lock the keypad
after using the phone
1. Choose (Settings) > Phone Settings > Keypad Settings.
2. Select Keypad Auto Lock.
3. Select one of these time intervals:
• 15 seconds
• 30 seconds
• 60 seconds
4. Press Save to make the change or Cancel.
Note
After the chosen time interval expires, the icon displays
and the keypad is locked.