User Manual

50 OL-10806-01
FINAL REVIEW - Cisco Confidential
Tips
• Auto lock is enabled only when the phone is idle and at the main screen.
• The keypad lock is temporarily disabled when you have an incoming call.
Changing the Keypad Tones
You can enable or disable the tones when you press a key on your keypad.
Viewing Your Network Profile List
Network profiles provide predefined settings for access to the wireless network and for authentication
and encryption in your system. Your phone administrator defines network profiles. You might have
more than one network profile available to you so you can access wireless network configurations at
locations that use different SSIDs or authentication types.
Your Cisco Unified Wireless IP Phone 7921G can have up to four enabled network profiles. Your
phone automatically scans the profiles and selects the network profile with the matching SSID and
settings for that specific wireless network.
Unlock the keypad 1. Press any key and the screen displays “Unlock keypad?”
2. Press Yes to unlock the keypad or No to keep the lock.
Turn off the automatic keypad
lock
1. Choose
(Settings) > Phone Settings > Keypad Settings.
2. Select Keypad Auto Lock.
3. Select Disable.
4. Press Save to make the change or Cancel.
Note
Under the Keypad Auto Lock option, Disabled displays.
Change the keypad tone level 1. Choose (Settings) > Phone Settings > Keypad Settings.
2. Select Keypad Tone.
3. Select one of the following:
• Disable—Plays no keypad tone.
• Normal—Plays tone when pressing keys.
• Loud—Plays louder tone when pressing keys.
The icon appears next to your selection.
4. Press Save to make the change or Cancel.
If you want to... Then...