User Manual

Using Call Logs and Directories
Cisco Unified Wireless IP Phone 7921G for Cisco Unified CallManager 4.1, 4.2, 5.0 and Later 53
FINAL REVIEW - Cisco Confidential
Cisco Unified CallManager Release 4.0 and Later
For information about how to set up and use the Personal Directory when connected to a Cisco Unified
CallManager 4.1 or later system, refer to Customizing Your Cisco IP Phone on the Web:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Cisco Unified CallManager Release 5.0 and Later
This section describes how to set up and use Personal Directory on your phone when you are connected
to a Cisco Unified CallManager 5.0 or later. Alternately, see Using Personal Directory on the Web,
page 61.
If you want to... Then...
Access Personal
Directory (for PAB
and Fast Dial codes)
1. Choose (Services) > Personal Address Book (PAB) Service (exact
name may vary).
2. Enter your Cisco Unified CallManager user ID and PIN, then press
Options > Submit.
Search for a PAB
entry
1. Access Personal Address Book.
2. Enter search criteria and choose Options > Submit.
Note
To get a complete list of your PAB entries, do not enter any search criteria,
and choose Options > Submit.
3. You can choose Options > Previous or Next to move through listings.
4. Scroll to the PAB listing that you want and press Select or .
Dial from PAB entry 1. Search for a PAB entry.
2. Scroll to the listing and press Select or .
3. Press Dial.
4. Scroll to the number that you want to dial and press OK.
5. Press OK again to dial the number.
Delete a PAB entry 1. Search for a PAB entry.
2. Scroll to the listing and press Select or .
3. Choose Options >Delete.
4. Press OK to confirm the deletion or Cancel.
Edit a PAB entry 1. Search for a PAB entry.
2. Scroll to the listing and press Select or .
3. Choose Options > Edit to modify a name or mail address.
4. If necessary, choose Options > Phones to modify a phone number.
5. Press Update.