Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.
CCDE, CCENT, CCSI, Cisco Eos, Cisco HealthPresence, Cisco Ironport, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco Nurse Connect , Cisco Stackpower, Cisco StadiumVision, Cisco TelePresence, Cisco Unified Computing System, Cisco WebEx, DCE, Flip Channels, Flip for Good, Flip Mino, Flip Video, Flip Video (Design), Flipshare (Design), Flip Ultra, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn, Cisco Store, and Flip Gift Card are service marks; and Access Regis
C O N T E N T S Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals 1 Translated Safety Warnings 1 Statement 1071—Warning Definition 1 Statement 331—Power Supply Installation Warning Statement 341—Metal Contacts on the Battery 14 16 Statement 361—VoIP and Emergency Calling Services Do Not Function if Power Fails 18 Statement 1001—Work During Lightning Activity Statement 1004—Installation Instructions Statement 1015—Battery Handling 22 24 26
Explosive Gas Warning Battery Disposal 41 41 Japanese Electric Appliance and Radio Laws 42 Statement 371—Power Cable and AC Adapter Statement 372—Wireless LAN Products Battery Safety Notices 42 Safety Guidelines 45 European Directives 42 42 46 Statement 287—Declaration of Conformity to R&TTE Directive 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein 46 Declaration of Conformity with Regard to the EU Directive 93/42/ECC 51 CE Marking 52 National Restrictions
RF Exposure Information 60 General RF Exposure Compliance 63 RF Exposure Statement for Canada 63 RF Exposure Statement for the European Union FCC Safety Compliance Statement 64 64 Manufacturer’s FCC Declaration of Conformity Statement Compliance Statement for Brazil 67 Compliance Statement for Canada 68 Compliance Statements for New Zealand 69 Permit to Connect (PTC) General Warning Use of IP Networks with the PSTN 69 70 The Use of Voice Compression through the PSTN Echo cancellation 70
Statement 257—Class A Notice for Taiwan and Other Traditional Chinese Markets 75 Statement 294—Class A Warning for Korea 75 Statement 340—Class A Warning for CISPR22 EMC Class B Notices and Warnings 76 79 Statement 157—VCCI Compliance for Class B Equipment Statement 295—Class B Notice for Korea Using External Devices 81 Related Documentation 82 80 Obtaining Documentation and Submitting a Service Request Cisco Product Security Overview 83 79 82
Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals This document provides international agency compliance, safety, and statutory information for the Cisco Unified Wireless IP Phone 7920 Series, desktop chargers, and multi-charger peripheral devices. Read this document before installing or servicing the Cisco Unified Wireless IP Phone 7920 Series and peripheral devices.
provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Waarschuwing BELANGRIJKE VEILIGHEIDSINSTRUCTIES Dit waarschuwingssymbool betekent gevaar. U verkeert in een situatie die lichamelijk letsel kan veroorzaken.
Attention IMPORTANTES INFORMATIONS DE SÉCURITÉ Ce symbole d'avertissement indique un danger. Vous vous trouvez dans une situation pouvant entraîner des blessures ou des dommages corporels. Avant de travailler sur un équipement, soyez conscient des dangers liés aux circuits électriques et familiarisez-vous avec les procédures couramment utilisées pour éviter les accidents.
relativi ai circuiti elettrici e conoscere le procedure standard per la prevenzione di incidenti. Utilizzare il numero di istruzione presente alla fine di ciascuna avvertenza per individuare le traduzioni delle avvertenze riportate in questo documento. CONSERVARE QUESTE ISTRUZIONI Advarsel VIKTIGE SIKKERHETSINSTRUKSJONER Dette advarselssymbolet betyr fare. Du er i en situasjon som kan føre til skade på person.
¡Advertencia! INSTRUCCIONES IMPORTANTES DE SEGURIDAD Este símbolo de aviso indica peligro. Existe riesgo para su integridad física. Antes de manipular cualquier equipo, considere los riesgos de la corriente eléctrica y familiarícese con los procedimientos estándar de prevención de accidentes. Al final de cada advertencia encontrará el número que le ayudará a encontrar el texto traducido en el apartado de traducciones que acompaña a este dispositivo.
6 OL-19076-01
Regulatory Compliance and Safety Information 7
8 OL-19076-01
Regulatory Compliance and Safety Information 9
10 OL-19076-01
Regulatory Compliance and Safety Information 11
12 OL-19076-01
Regulatory Compliance and Safety Information 13
Statement 331—Power Supply Installation Warning Warning 14 The power supply must be placed indoors.
Waarschuwing De stroomtoevoer moet binnen worden geplaatst. Varoitus Tehonlähde on sijoitettava sisätiloihin. Attention Le bloc d’alimentation électrique doit être placé à l’intérieur. Warnung Die Stromversorgungsquelle darf nicht im Freien aufgestellt werden. Avvertenza L’alimentatore deve essere posto in un luogo interno. Advarsel Strømkilden skal være plassert innendørs. Aviso A fonte de alimentação deve ser instalada no interior.
Statement 341—Metal Contacts on the Battery Warning Do not touch or bridge the metal contacts on the battery. Unintentional discharge of the batteries can cause serious burns. Statement 341 Waarschuwing Raak de metalen contacten op de batterij niet aan en verbind ze niet met elkaar. Het onopzettelijk ontladen van de batterijen kan ernstige brandwonden veroorzaken. Varoitus Älä koske akun metallisiin kosketuspintoihin tai oikosulje niitä. Akkujen purkaminen vahingossa voi aiheuttaa vakavia palovammoja.
¡Advertencia! No tocar los contactos de metal de la batería, ni hacer puente con ellos. La descarga accidental de las baterías puede provocar quemaduras graves. Varning! Vidrör inte och förbikoppla inte batteriets metallkontakter. Oavsiktlig urladdning av batterierna kan orsaka allvarliga brännskador.
Statement 361—VoIP and Emergency Calling Services Do Not Function if Power Fails Warning Voice over IP (VoIP) service and the emergency calling service do not function if power fails or is disrupted. After power is restored, you might have to reset or reconfigure equipment to regain access to VoIP and the emergency calling service. In the USA, this emergency number is 911. You need to be aware of the emergency number in your country.
système pour accéder de nouveau au service VoIP et à celui des appels d’urgence. Aux États-Unis, le numéro des services d’urgence est le 911. Vous devez connaître le numéro d’appel d'urgence en vigueur dans votre pays. Warnung Bei einem Stromausfall oder eingeschränkter Stromversorgung funktionieren VoIP-Dienst und Notruf nicht. Sobald die Stromversorgung wieder hergestellt ist, müssen Sie möglicherweise die Geräte zurücksetzen oder neu konfigurieren, um den Zugang zu VoIP und Notruf wieder herzustellen.
reconfigurar o equipamento para voltar a utilizar os serviços VoIP ou chamadas de emergência. Nos EUA, o número de emergência é o 911. É importante que saiba qual o número de emergência no seu país. ¡Advertencia! El servicio de voz sobre IP (VoIP) y el de llamadas de emergencia no funcionan si se interrumpe el suministro de energía. Tras recuperar el suministro es posible que deba que restablecer o volver a configurar el equipo para tener acceso a los servicios de VoIP y de llamadas de emergencia.
Regulatory Compliance and Safety Information 21
Statement 1001—Work During Lightning Activity Warning Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001 Waarschuwing Tijdens onweer dat gepaard gaat met bliksem, dient u niet aan het systeem te werken of kabels aan te sluiten of te ontkoppelen. Varoitus Älä työskentele järjestelmän parissa äläkä yhdistä tai irrota kaapeleita ukkosilmalla. Attention Ne pas travailler sur le système ni brancher ou débrancher les câbles pendant un orage.
Regulatory Compliance and Safety Information 23
Statement 1004—Installation Instructions Warning Read the installation instructions before connecting the system to the power source. Statement 1004 Waarschuwing Raadpleeg de installatie-instructies voordat u het systeem op de voedingsbron aansluit. Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen. Attention Avant de brancher le système sur la source d'alimentation, consulter les directives d'installation.
¡Advertencia! Lea las instrucciones de instalación antes de conectar el sistema a la red de alimentación. Varning! Läs installationsanvisningarna innan du kopplar systemet till strömförsörjningsenheten.
Statement 1015—Battery Handling Warning There is the danger of explosion if the battery is replaced incorrectly. Replace the battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. Statement 1015 Waarschuwing Er is ontploffingsgevaar als de batterij verkeerd vervangen wordt. Vervang de batterij slechts met hetzelfde of een equivalent type dat door de fabrikant aanbevolen is.
Varoitus Räjähdyksen vaara, jos akku on vaihdettu väärään akkuun. Käytä vaihtamiseen ainoastaan saman- tai vastaavantyyppistä akkua, joka on valmistajan suosittelema. Hävitä käytetyt akut valmistajan ohjeiden mukaan. Attention Danger d'explosion si la pile n'est pas remplacée correctement. Ne la remplacer que par une pile de type semblable ou équivalent, recommandée par le fabricant. Jeter les piles usagées conformément aux instructions du fabricant.
¡Advertencia! Existe peligro de explosión si la batería se reemplaza de manera incorrecta. Reemplazar la batería exclusivamente con el mismo tipo o el equivalente recomendado por el fabricante. Desechar las baterías gastadas según las instrucciones del fabricante. Varning! 28 Explosionsfara vid felaktigt batteribyte. Ersätt endast batteriet med samma batterityp som rekommenderas av tillverkaren eller motsvarande. Följ tillverkarens anvisningar vid kassering av använda batterier.
Statement 1019—Main Disconnecting Device for the Battery Charger Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019 Waarschuwing De combinatie van de stekker en het elektrisch contactpunt moet te allen tijde toegankelijk zijn omdat deze het hoofdmechanisme vormt voor verbreking van de aansluiting. Varoitus Pistoke/liitinkohta toimii pääkatkaisumekanismina. Pääsy siihen on pidettävä aina esteettömänä.
Advarsel Kombinasjonen støpsel/uttak må alltid være tilgjengelig ettersom den fungerer som hovedfrakoplingsenhet. Aviso A combinação ficha-tomada deverá ser sempre acessível, porque funciona como interruptor principal. ¡Advertencia! El conjunto de clavija y toma ha de encontrarse siempre accesible ya que hace las veces de dispositivo de desconexión principal. Varning! 30 Man måste alltid kunna komma åt stickproppen i uttaget, eftersom denna koppling utgör den huvudsakliga frånkopplingsanordningen.
Statement 1040—Product Disposal Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Waarschuwing Het uiteindelijke wegruimen van dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen.
Varoitus Tämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti. Attention La mise au rebut ou le recyclage de ce produit sont généralement soumis à des lois et/ou directives de respect de l'environnement. Renseignez-vous auprès de l'organisme compétent. Warnung Die Entsorgung dieses Produkts sollte gemäß allen Bestimmungen und Gesetzen des Landes erfolgen. Avvertenza Lo smaltimento di questo prodotto deve essere eseguito secondo le leggi e regolazioni locali.
Regulatory Compliance and Safety Information 33
Statement 1045—Short-circuit Protection for the Battery Charger Warning This product requires short-circuit (overcurrent) protection, to be provided as part of the building installation. Install only in accordance with national and local wiring regulations. Statement 1045 Waarschuwing Voor dit product moet kortsluitbeveiliging (overstroombeveiliging) deel uitmaken van de installatie in het gebouw. De installatie moet voldoen aan de nationale en lokale bedradingvoorschriften.
Attention La protection de ce produit contre les courts-circuits (surtensions) doit être assurée par la configuration électrique du bâtiment. Vérifiez que l'installation a lieu uniquement en conformité avec les normes de câblage en vigueur au niveau national et local. Warnung Für dieses Produkt ist eine Kurzschlußsicherung (Überstromsicherung) erforderlich, die als Teil der Gebäudeinstallation zur Verfügung gestellt wird.
36 OL-19076-01
Regulatory Compliance and Safety Information 37
Statement 1074—Comply with Local and National Electrical Codes Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 Waarschuwing Bij installatie van de apparatuur moet worden voldaan aan de lokale en nationale elektriciteitsvoorschriften.
Varoitus Laitteisto tulee asentaa paikallisten ja kansallisten sähkömääräysten mukaisesti. Attention L'équipement doit être installé conformément aux normes électriques nationales et locales. Warnung Die Installation der Geräte muss den Sicherheitsstandards entsprechen. Avvertenza L'installazione dell'impianto deve essere conforme ai codici elettrici locali e nazionali. Advarsel Installasjon av utstyret må samsvare med lokale og nasjonale elektrisitetsforskrifter.
40 OL-19076-01
Explosive Gas Warning Warning The use of the Cisco Unified Wireless IP Phone in hazardous environments such as areas where high levels of explosive gas may be present is not recommended. Check with the site safety engineer before using any type of wireless device in such an environment. Battery Disposal Warning Do not dispose of the battery pack in fire or water. The battery may explode if placed in the fire.
Japanese Electric Appliance and Radio Laws Statement 371—Power Cable and AC Adapter Statement 372—Wireless LAN Products Battery Safety Notices These battery safety notices apply to the batteries that are approved by the Cisco Unified Wireless IP Phone manufacturers.
Caution This symbol means reader be careful. In this situation, you might do something that could result in equipment damage. Refer to the product documentation for instructions. Caution The battery pack is intended for use only with this device. Caution Do not disassemble, crush, puncture, or incinerate the battery pack. Caution To avoid risk of fire, burns, or damage to your battery pack, do not allow a metal object to touch the battery contacts.
Caution Handle a damaged or leaking battery with extreme care. If you come in contact with the electrolyte, wash the exposed area with soap and water. If the electrolyte has come in contact the eye, flush the eye with water for 15 minutes and seek medical attention. Caution Do not charge the battery pack if the ambient temperature exceeds 104 degrees Fahrenheit (40 degrees Celsius). Caution Do not expose the battery pack to high storage temperatures (above 140 degrees Fahrenheit, 60 degrees Celsius).
Caution To obtain a replacement battery, contact your local dealer. Use only the batteries that have a Cisco part number. Caution Use only the Cisco power supply that is compatible with your phone. To order your power supply, contact your local dealer and refer to the list of Cisco part numbers.
• The use of wireless devices in hazardous locations is limited to the constraints posed by the safety directors of such environments. • The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). European Directives This section includes conformity statements for European directives.
English This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. [Bulgarian]: [Czech]: Dansk [Danish]: Dette udstyr er i overensstemmelse med de væsentlige krav og andre relevante bestemmelser i Direktiv 1999/5/EF. Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.
[Greek]: Français [French]: Cet appareil est conforme aux exigences essentielles et aux autres dispositions pertinentes de la Directive 1999/5/EC. Íslenska [Icelandic]: Þetta tæki er samkvæmt grunnkröfum og öðrum viðeigandi ákvæðum Tilskipunar 1999/5/EC. Italiano [Italian]: Questo apparato é conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/CE.
Malti [Maltese]: Magyar [Hungarian]: Norsk Norwegian Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-direktiv 1999/5/EF. Polski [Polish]: Português [Portuguese]: Este equipamento está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva 1999/5/EC. [Romania]: Slovenskos [Slovenian]: Ta naprava je skladna z bistvenimi zahtevami in ostalimi relevantnimi pogoji Direktive 1999/5/EC.
Slovensky [Slovak]: Toto zariadenie je v zhode so základnými požiadavkami a inými príslušnými nariadeniami direktív: 1999/5/EC. Suomi [Finnish]: Svenska [Swedish]: Note 50 You can check on the approval status of your product at the following URL: http://tools.cisco.com/cse/prdapp/jsp/externalsearch.
Declaration of Conformity with Regard to the EU Directive 93/42/ECC This device cannot be categorized as a medical device in order to perform diagnostic, monitoring and treatment functions, as defined in the Medical Directive. However, it does conform to the EMC requirements of the Medical Directive 93/42/EEC.
CE Marking For the Cisco Unified Wireless IP Phone 7920 Series, the following CE mark and class-2 identifier are affixed to the equipment and packaging: National Restrictions In the majority of the EU and other European Countries, the 2.4- and 5-GHz bands have been made available for the use of wireless LANs. Table 1 provides an overview of the regulatory requirements in general applicable for the 2.4- and 5-GHz bands. Note The regulatory limits for maximum output power are specified in eirp.
The requirements for any country may evolve. Cisco recommends that you check with the local authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs. Table 1 Overview of Regulatory Requirements for Wireless LANs Frequency Band (MHz) Max Power Level (eirp) (mW) Indoor Only Indoor and Outdoor 2400–2483.5 100 X 5150–53501 200 5470–5725 1.
France For 2.4 GHz, the output power is restricted to 10 mW eirp when the product is used outdoors in the band 2454–2483.5 MHz. There are no restrictions when used in other parts of the 2.4 GHz band. For more details, check http://www.arcep.fr/ Pour la bande 2,4 GHz, la puissance est limitée à 10 mW en p.i.r.e. pour les équipements utilisés en extérieur dans la bande 2454 – 2483,5 MHz. Il n’y a pas de restrictions pour des utilisations dans d’autres parties de la bande 2,4 GHz. Consultez http://www.arcep.
California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33) The battery inside this product might contain perchlorate, a known hazardous substance, so special handling and disposal of this product might be necessary. For more information about perchlorate and best management practices for perchlorate-containing substances, see http://www.dtsc.ca.gov/HazardousWaste/Perchlorate/index.
Table 2 Standards Compliance (continued) Regulatory Compliance EMC1 56 Standard • EN 60950 • IEC 60950 • AS/NZS 60950 • 47 CFR Part 15 Class B# • CISPR 11 • CISPR 22 Class B# • AS/NZS CISPR 22 Class B# • CISPR 24 • ICES-003 Class B# • EN 301.489-1 • EN 301.
Table 2 Standards Compliance (continued) Regulatory Compliance EMC3 Standard • EN 61000-3-2 • EN 61000-3-3 • EN 61000-6-1 • KN222 • VCCI Class B# • 47 CFR Part 15 Class B# • CISPR 11 • CISPR 22 Class B# • AS/NZS CISPR 22 Class B# • CISPR 24 • FCC Part 15.247* • FCC Part 15.
Table 2 Standards Compliance (continued) Regulatory Compliance Japan EU RF Exposure3 Standard • IEEE 802.a** • IEEE 802.b/g* • TELEC 71** • EN 300.328* • EN 300.3862 • EN 301.893** • OET-65C (01-01) • ANSI C95.1 (91) • RSS-102 • AS/NZS 2772 • EN 50.360 1. Standards marked with a pound (#) are Class B for the Cisco Unified Wireless IP Phone 7920 and 7921G and do not apply to the chargers which are Class A products. 2.
3. Standards marked with a pound (#) are Class B for the Cisco Unified Wireless IP Phone 7920 and 7921G and do not apply to the chargers which are Class A products. * Standards marked with an asterisk (*) apply to the Cisco Unified Wireless IP Phone 7920 Series when using 802.11b/g WiFi ** Standards marked with two asterisks (**) apply only to the Cisco Unified Wireless IP Phone 7921G when using 802.
RF Exposure Information The radio module has been evaluated under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in 47 CFR Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. This model meets the applicable government requirements for exposure to radio frequency waves. This wireless phone contains a radio transceiver.
The highest measured SAR levels for the phones are these: • Cisco Unified Wireless IP Phone 7920 is 0.54 W/kg. • Cisco Unified Wireless IP Phone 7921G is 0.51W/kg. • Cisco Unified Wireless IP Phone 7925G is 0.768W/kg. Additional information on SAR and RF Exposure can be obtained off the FCC website at: www.fcc.gov/oet/rfsafety There is no conclusive proof that these mobile phones are or are not a health risk. The FDA and numerous researchers are continuing studies of RF radiation and health issues.
There are several suggested methods to reduce exposure for the user. Among those include: 1. Using a hands-free handset to increase the distance between the antenna and the head of the user. 2. Orienting the antenna away from the user. Additional information can be obtained from the following documentation: • Cisco Systems Spread Spectrum Radios and RF Safety white paper at the following location: http://www.cisco.com/warp/public/cc/pd/witc/ao340ap/prodlit/rfhr_wi.
Additional information can also be obtained from the following organizations: • World Health Organization Internal Commission on Non-Ionizing Radiation Protection at www.who.int/emf • United Kingdom, National Radiological Protection Board at www.nrpb.org.uk • Cellular Telecommunications Association at www.wow-com.
RF Exposure Statement for the European Union This device has been evaluated and found compliant in accordance with EU EMF Directive 1999/519/EC. FCC Safety Compliance Statement The Federal Communications Commission (FCC), with its action in ET Docket 93-62, has adopted a safety standard for human exposure to Radio Frequency (RF) electromagnetic energy emitted by FCC-certified equipment.
Manufacturer’s FCC Declaration of Conformity Statement Model: Cisco Unified Wireless IP Phone 7920 FCC Certification Number: MCLU58H002 Model: Cisco Unified Wireless IP Phone 7921G FCC Certification Number: LDK7900001 Model: Cisco Unified Wireless IP Phone 7925G FCC Certification Number: LDK7925G0269 Manufacturer: Cisco Systems, Inc.
These devices comply with Part 15 rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Caution The Part 15 radio device operates on a non-interference basis with other devices operating at this frequency. Any changes or modification to said product not expressly approved by Cisco, including the use of non-Cisco antennas, could void the user’s authority to operate this device.
For more information, go to this URL: http://www.anatel.gov.br Compliance Statement for Canada This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material broilleur du Canada.
This device complies with Class B Limits of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The device is certified to the requirements of RSS-210 for 2.4-GHz spread spectrum devices.
assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services. Use of IP Networks with the PSTN Internet Protocol (IP) by its nature introduces delay into speech signals as each data packet is formulated and addressed.
Echo cancellation Echo cancellers are not normally required in the Telecom PSTN because geographic delays are acceptable where CPE return loss is maintained within Telepermit limits. However, those private networks making use of Voice-over-IP (VoIP) technology are required to provide echo cancellation for all voice calls. The combined effect of audio/VoIP conversion delay and IP routing delay can cause the echo cancellation time of 64 mS to be required.
EMC Class A Notices and Warnings This section includes the EMC Class A notices and warnings for the chargers for the Cisco Unified Wireless IP Phone 7920 Series.
Statement 191—VCCI Class A Warning for Japan Warning Note This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. See Table 2, Standards Compliance, for the EMC class for specific models and parts.
Statement 256—Class A Warning for Hungary Warning 74 This equipment is a class A product and should be used and installed properly according to the Hungarian EMC Class A requirements (MSZEN55022). Class A equipment is designed for typical commercial establishments for which special conditions of installation and protection distance are used.
Statement 257—Class A Notice for Taiwan and Other Traditional Chinese Markets Warning This is a Class A Information Product, when used in residential environment, it may cause radio frequency interference, under such circumstances, the user may be requested to take appropriate countermeasures. Statement 257 Statement 294—Class A Warning for Korea Warning This is a Class A Device and is registered for EMC requirements for industrial use. The seller or buyer should be aware of this.
Statement 340—Class A Warning for CISPR22 Warning This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Statement 340 Waarschuwing Dit is een product van klasse A. In een woonomgeving kan dit product radiostoring veroorzaken. In dat geval moet de gebruiker de juiste maatregelen nemen. Varoitus Tämä on A-luokan tuote.
Warnung Dies ist ein Produkt der Klasse A. Bei der Verwendung dieses Produkts im Haus- oder Wohnungsbereich kann es zu Funkstörungen kommen. In diesem Fall muss der Benutzer u. U. angemessene Maßnahmen ergreifen. Avvertenza Prodotto di classe A. È possibile che il prodotto generi interferenze radio in un ambienti chiusi. In questo caso l'utente deve intraprendere le misure adeguate per risolvere il problema. Advarsel Dette er et produkt i klasse A.
78 OL-19076-01
EMC Class B Notices and Warnings This section includes the EMC Class B warnings for the Cisco Unified Wireless IP Phone 7920 Series. Statement 157—VCCI Compliance for Class B Equipment Warning This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.
Statement 295—Class B Notice for Korea Warning 80 This is a Class B Device and is registered for EMC requirements for residential use. This device can be used not only in residential areas but in all other areas.
Using External Devices The following information applies when you use external devices with the Cisco Unified Wireless IP Phone. Cisco recommends the use of good quality external devices (such as headsets) that are shielded against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of these devices and their proximity to other devices such as mobile phones or two-way radios, some audio noise may still occur.
Caution In European Union countries, use only external headsets that are fully compliant with the EMC Directive [89/336/EC]. Related Documentation For more information, refer to the Cisco Unified Wireless IP Phone 7920 Series publications available at this location: http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_supp ort_series_home.
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco Product Security Overview This product contains cryptographic features and is subject to United States and local country laws governing import, export, transfer and use.
84 OL-19076-01
