User's Manual
Table Of Contents
- Regulatory Compliance and Safety Information for Cisco Unified Wireless IP Phone 7920 Series and Peripherals
- Translated Safety Warnings
- Statement 1071-Warning Definition
- Statement 331-Power Supply Installation Warning
- Statement 341-Metal Contacts on the Battery
- Statement 361-VoIP and Emergency Calling Services Do Not Function if Power Fails
- Statement 1001-Work During Lightning Activity
- Statement 1004-Installation Instructions
- Statement 1015-Battery Handling
- Statement 1019-Main Disconnecting Device for the Battery Charger
- Statement 1040-Product Disposal
- Statement 1045-Short-circuit Protection for the Battery Charger
- Statement 1074-Comply with Local and National Electrical Codes
- Explosive Gas Warning
- Battery Disposal
- Japanese Electric Appliance and Radio Laws
- Battery Safety Notices
- European Directives
- California Perchlorate Contamination Prevention Act
- Standards Compliance
- FCC Safety Compliance Statement
- Compliance Statement for Brazil
- Compliance Statement for Canada
- Compliance Statements for New Zealand
- Compliance Statement for Taiwan
- EMC Class A Notices and Warnings
- EMC Class B Notices and Warnings
- Using External Devices
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
- Cisco Product Security Overview
- Translated Safety Warnings
53
Regulatory Compliance and Safety Information
The requirements for any country may evolve. Cisco recommends that you
check with the local authorities for the latest status of their national
regulations for both the 2.4- and 5-GHz wireless LANs.
The following countries have requirements or
restrictions in addition to those
listed in Table 2.
Denmark
In Denmark, the 5150–5350 MHz is also allowed for outdoor usage.
I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs.
Ta b l e 1 Overview of Regulatory Requirements for Wireless LANs
Frequency Band
(MHz)
Max Power Level
(eirp) (mW) Indoor Only
Indoor and
Outdoor
2400–2483.5 100 X
5150–5350
1
1. Dynamic Frequency Selection and Transmit Power Control is required in the 5250 to 5350
MHz and 5470 to 5725 MHz frequency range.
200 X
5470–5725
1
1000 X