User's Manual
Table Of Contents
- Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Quick Reference for Cisco Unified Communications Manager 8.0(1)
- Contents
- Getting Started
- Connecting Your Phone
- An Overview of Your Phone
- Cisco Unified Wireless IP Phone 7925G and 7926G
- Cisco Unified Wireless IP Phone 7925G-EX
- Understanding Buttons and Hardware
- Understanding Phone Screen Features
- Understanding Feature Buttons and Menus
- Understanding Lines vs. Calls
- Understanding Out-of-Range Alerts
- Understanding Feature Availability
- Bluetooth Wireless Headset Support
- Cleaning the Phone
- Basic Call Handling
- Advanced Call Handling
- Speed Dialing
- Picking Up a Redirected Call on Your Phone
- Storing and Retrieving Parked Calls
- Logging Out of Hunt Groups
- Using a Shared Line
- Using BLF to Determine a Line State
- Making and Receiving Secure Calls
- Tracing Suspicious Calls
- Prioritizing Critical Calls
- Using Cisco Extension Mobility
- Using the Application Button
- Using the Barcode Scanner
- Using a Handset, Headset, and Speakerphone
- Changing Phone Settings
- Using Call Logs and Directories
- Accessing Voice Messages
- Accessing Your User Options Web Pages
- Understanding Additional Configuration Options
- Troubleshooting Your Phone
- Cisco One-Year Limited Hardware Warranty Terms
38 OL-16132-01
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
• If parties on a call hear a beep tone, the call might be monitored or recorded. Ask your system
administrator for more information.
• If you press any digits while on an active call, the digits will be displayed on the screen and will
timeout after 2 seconds. The digits will display again if additional digits are pressed.
• If you hear a beep tone from your phone, you might be out of range of the wireless network. Move
to a location where you can see a strong signal icon
on the phone if you wish to use your
phone.
Placing a Call—Additional Options
You can place calls using special features and services that might be available on your phone. See your
system administrator for more information about these additional options.
If you want to... Then...
For more information,
see...
Speed dial a contact number
in your local phone book
Do one of the following:
• Press and hold a speed-dial hot key for
about two seconds.
Note If dialing a two-digit number, enter the
first digit, then press and hold the
second digit for about two seconds.
• Choose (Directory)> Speed
Dials, highlight a speed dial, and
press .
Using the Phone Book
on Your Phone,
page 88
Speed Dialing, page 55
Speed dial a phone number
(for a Line View speed-dial
number set up on the web)
1. Press .
2. Scroll to a speed dial .
3. Press or to make the call.
Speed Dialing, page 55
Place a call while another
call is active (using a
different line)
1. Press Hold.
2. Press .
3. Scroll to another line and press .
4. Dial a number.
5. Press to make the call.
Using Hold and
Resume, page 42
Place the call on a
secondary line
1. Press and scroll to another line.
2. Dial a number.
3. Press to make the call
Switching Between
Multiple Calls, page 44