User's Manual
Table Of Contents
- Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Quick Reference for Cisco Unified Communications Manager 8.0(1)
- Contents
- Getting Started
- Connecting Your Phone
- An Overview of Your Phone
- Cisco Unified Wireless IP Phone 7925G and 7926G
- Cisco Unified Wireless IP Phone 7925G-EX
- Understanding Buttons and Hardware
- Understanding Phone Screen Features
- Understanding Feature Buttons and Menus
- Understanding Lines vs. Calls
- Understanding Out-of-Range Alerts
- Understanding Feature Availability
- Bluetooth Wireless Headset Support
- Cleaning the Phone
- Basic Call Handling
- Advanced Call Handling
- Speed Dialing
- Picking Up a Redirected Call on Your Phone
- Storing and Retrieving Parked Calls
- Logging Out of Hunt Groups
- Using a Shared Line
- Using BLF to Determine a Line State
- Making and Receiving Secure Calls
- Tracing Suspicious Calls
- Prioritizing Critical Calls
- Using Cisco Extension Mobility
- Using the Application Button
- Using the Barcode Scanner
- Using a Handset, Headset, and Speakerphone
- Changing Phone Settings
- Using Call Logs and Directories
- Accessing Voice Messages
- Accessing Your User Options Web Pages
- Understanding Additional Configuration Options
- Troubleshooting Your Phone
- Cisco One-Year Limited Hardware Warranty Terms
Using a Handset, Headset, and Speakerphone
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
If you want to... Then...
Enable/disable Bluetooth
on your phone
1. Choose > Phone Settings > Bluetooth.
2. Highlight Bluetooth and press Select.
3. Select Enable or Disable, then press Save.
If enabled, the Bluetooth enabled icon appears. If disabled, the
icon disappears.
Note Bluetooth must be enabled on the phone before you can perform
tasks such as scanning, pairing, and unpairing.
Scan for Bluetooth devices 1. Choose > Phone Settings > Bluetooth > Device List.
2. Press Scan. A list of devices appears.
Note It may take a few seconds for the scan to complete.
3. To rescan for a device, press Rescan from Scan Results.
Pair a Bluetooth headset
with the phone
1. From the Scan Results list, select a Bluetooth headset and press
Pair.
2. When prompted, enter the Bluetooth Passkey, then press
(Select) or Options > OK.
Note Obtain the Bluetooth Passkey from your Bluetooth device
documentation. Pairing must be completed within one minute or it
will fail.
3. If the pairing succeeds, the newly paired headset is added to the
Device List and becomes connected to the phone (if no prior
Bluetooth connection exists between another device and the
phone.) If a prior connection exists, first unpair or disconnect the
other device from the phone.
The Bluetooth device connected icon is displayed, and a
checkmark appears next to the device name.
4. If the pairing fails, press Back to retry.
Connect a Bluetooth
headset already paired (but
not connected) with the
phone
Do one of the following:
• Tap on the headset to send a connection request to the phone.
• Choose > Phone Settings > Bluetooth > Device List,
highlight the headset, and press Options > Connect.