User's Manual
Table Of Contents
- Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Quick Reference for Cisco Unified Communications Manager 8.0(1)
- Contents
- Getting Started
- Connecting Your Phone
- An Overview of Your Phone
- Cisco Unified Wireless IP Phone 7925G and 7926G
- Cisco Unified Wireless IP Phone 7925G-EX
- Understanding Buttons and Hardware
- Understanding Phone Screen Features
- Understanding Feature Buttons and Menus
- Understanding Lines vs. Calls
- Understanding Out-of-Range Alerts
- Understanding Feature Availability
- Bluetooth Wireless Headset Support
- Cleaning the Phone
- Basic Call Handling
- Advanced Call Handling
- Speed Dialing
- Picking Up a Redirected Call on Your Phone
- Storing and Retrieving Parked Calls
- Logging Out of Hunt Groups
- Using a Shared Line
- Using BLF to Determine a Line State
- Making and Receiving Secure Calls
- Tracing Suspicious Calls
- Prioritizing Critical Calls
- Using Cisco Extension Mobility
- Using the Application Button
- Using the Barcode Scanner
- Using a Handset, Headset, and Speakerphone
- Changing Phone Settings
- Using Call Logs and Directories
- Accessing Voice Messages
- Accessing Your User Options Web Pages
- Understanding Additional Configuration Options
- Troubleshooting Your Phone
- Cisco One-Year Limited Hardware Warranty Terms
72 OL-16132-01
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Tips
• Only one Bluetooth device can be connected to the phone at one time.
• A Bluetooth device must remain within 10 m of the phone to keep the connection.
• A Bluetooth device disconnects if the phone is powered off or if Bluetooth is disabled on the
phone.
• If a device previously paired with the phone is used to connect to another Bluetooth device, you
must first unpair it, then pair it again with the phone.
• If a Bluetooth headset becomes disconnected (being out-of-range of the phone or the phone battery
loses power), it should automatically reconnect when it is in-range again or the battery is
recharged. If it does not reconnect, you can tap on the Bluetooth headset once to reestablish the
connection.
Unpair a Bluetooth headset
from the phone
1. Choose > Phone Settings > Bluetooth > Device List.
2. Select a headset from the list, press Options > Unpair.
3. Press Yes to confirm.
The headset disconnects from the phone and is removed from the
Device List.
Disconnect a Bluetooth
headset from the phone
1. Choose > Phone Settings > Bluetooth > Device List.
2. Select a headset from the list, press Options > Disconn.
3. Press Yes to confirm.
The headset disconnects from the phone but remains on the Device
List (without a checkmark next to the device name).
Switch from a Bluetooth
headset to the speaker or
handset during a call
1. Press and hold . The Select Audio Path menu appears.
2. Select Speaker or Handset.
3. To switch modes again, press and hold , and select another
audio mode.
Note After the call, the phone remains in the last audio mode it used
during the call.
Switch to the Bluetooth
headset during a call from
the speaker or handset
1. Press and hold . The Select Audio Path menu appears.
2. Select Bluetooth.
Note If a wired headset is connected to the phone, the Bluetooth option
cannot be selected even if the Bluetooth connected icon is
displayed. To use the Bluetooth headset, you must first unplug the
wired headset.
If you want to... Then...