User Manual
Table Of Contents
- Regulatory Compliance and Safety Information for Cisco Unified IP Phones
- Contents
- Translated Safety Warnings
- Statement 1071—Warning Definition
- Statement 19—TN Power Warning
- Statement 331—Power Supply Installation Warning
- Statement 353—This Product Must be Connected
- Statement 378—Read Wall-Mounting Instructions Before Installation
- Statement 1001—Work During Lightning Activity
- Statement 1004—Installation Instructions
- Statement 1005—Circuit Breaker
- Statement 1015—Battery Handling
- Statement 1019—Main Disconnecting Device
- Statement 1021—SELV Circuit
- Statement 1030—Equipment Installation
- Statement 1040—Product Disposal
- Statement 1072—Shock Hazard from Interconnections
- Statement 1074—Comply with Local and National Electrical Codes
- NOM 121 for Mexico for Cisco Unified IP Phones 9900, 8900, and 8831
- Japanese Electric Appliance and Radio Laws
- Battery Safety Notices
- Cell Phone Interference Caution
- Using External Devices with Your Cisco Unified IP Phone
- European Directives
- Compliance and Safety Information
- Regulatory Compliance
- DGT Warning Statement for Cisco Unified IP Phones 9951 and 9971
- FCC Safety Compliance Statement
- Statement 2002—Declaration of Conformity with Regard to the Directives 2006/95/EC and 2004/108/EC
- Statement 2018—Class B Notice for FCC
- Statement 2022—Class B Notice for Canada
- Canadian Compliance for Cisco Unified IP Phone 9900, 8900, and 8831
- RF Exposure Statement
- Statement 295—Class B Warning for Korea
- Statement 157—VCCI Compliance for Class B Equipment
- Statement 355—Telephone Receivers Produce a Magnetic Field
- Compliance Statement for Brazil
- Obtaining Documentation and Submitting a Service Request
9
Regulatory Compliance and Safety Information for Cisco Unified IP Phones
Statement 353—This Product Must be Connected
Warning
This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source
or an IEC60950 compliant limited power source.
Statement 353
Waarschuwing
Dit product moet worden verbonden met een stroomvoorziening die compatibel is met PoE
(power-over-ethernet) IEEE 802.3af of een beperkte stroomvoorziening die compatibel is met
IEC60950.
Varoitus
Tämä tuote on liitettävä PoE (power-over-ethernet) IEEE 802.3af -yhteensopivaan virtalähteeseen tai
IEC60950-yhteensopivaan rajoitettuun virtalähteeseen.
Attention
Ce produit doit être connecté à une source d'alimentation électrique par câble Ethernet (PoE)
conforme à la norme IEEE 802.3af ou à une source d'alimentation limitée conforme à la norme
IEC60950.
Warnung
Dieses Produkt muss entweder an eine Stromquelle angeschlossen sein, die mit dem IEEE
802.3af-Standard Power-over-Ethernet (PoE) kompatibel ist oder an eine Stromquelle für geringe
Leistungen, die IEC60950-kompatibel ist.
Avvertenza
Questo prodotto deve essere connesso a una fonte di alimentazione di tipo PoE
(power-over-ethernet) conforme a IEEE 802.3af o a una fonte di alimentazione conforme a IEC60950.
Advarsel
Dette produktet må være koblet til en Power-over-Ethernet (PoE) IEEE 802.3af-kompatibel strømkilde
eller en IEC60950-kompatibel begrenset strømkilde.
Aviso
Este produto tem de estar ligado a uma fonte de alimentação compatível com a norma IEEE 802.3af,
também conhecida pela sigla Power over Ethernet (PoE), ou a uma fonte de alimentação limitada
compatível com a norma IEC60950.
¡Advertencia!
Debe conectar este producto a una fuente de alimentación sobre ethernet (PoE) conforme con el
estándar IEEE 802.3af, o a una fuente limitada conforme con el estándar IEC60950.
Varning!
Denna produkt måste vara ansluten till en PoE IEEE 802.3af-kompatibel strömkälla eller en
IEC60950-kompatibel begränsad strömkälla.