User's Manual

Calling Features
Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications Manager 8.5 (SCCP) 59
EFT DRAFT - CISCO CONFIDENTIAL
• Call Pickup—Allows you to monitor the line status of (and pick up a ringing call on) a ringing call
on a speed-dial button.
Your system administrator can also set up your phone to play an audible alert when a call is
ringing on the monitored line.
Related Topics
• Call Park, page 47
• Call Pickup, page 49
• Speed Dial, page 65
Malicious Call Identification
Malicious Call Identification (MCID) allows you to identify an active call as suspicious, which initiates
a series of automated tracking and notification messages.
Trace a Suspicious Call
Press the Malicious Caller ID button to send a silent notification message to your system
administrator.
When the silent notification message is sent, your phone provides both a visual and audible
confirmation.
Meet Me
Meet Me allows you to call a predetermined number at a scheduled time to host or join a conference.
The conference begins when the host connects. Participants who call the conference before the host
has joined hear a busy tone and must dial again.
The conference ends when all participants hang up; the conference does not automatically end when
the host disconnects.
Host a Meet-Me Conference
1. Obtain a Meet-Me phone number from your system administrator.
2. Distribute the Meet-Me phone number to participants.
3. When you are ready to start the meeting, lift the handset to get a dial tone and then press the
Meet Me button.
4. Dial the Meet-Me phone number.