User's Guide

ManualsBrandsCisco Systems ManualsElectronicsWiFi module

IMPORTANT SAFETY INSTRUCTIONS

Notice to Installers

The servicing instructions in this notice are for use by quali ed service personnel only. To reduce

the risk of electric shock, do not perform any servicing other than that contained in the operating

instructions, unless you are quali ed to do so.

20080814_Installer820

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8) Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including amplifiers)

that produce heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding-type

plug has two blades and a third grounding

prong. The wide blade or the third prong

are provided for your safety. If the

provided plug does not fit into your outlet,

consult an electrician for replacement of

the obsolete outlet.

10) Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

11) Only use attachments/accessories

specified by the manufacturer.

12) Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use caution when

moving the cart/apparatus combination

to avoid injury from tip-over.

13) Unplug this apparatus during lightning

storms or when unused for long periods

of time.

14) Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as a power-supply cord or

plug is damaged, liquid has been spilled

or objects have fallen into the apparatus,

the apparatus has been exposed to rain

or moisture, does not operate normally,

or has been dropped.

Power Source Warning

A label on this product indicates the correct

power source for this product. Operate this

product only from an electrical outlet with the

voltage and frequency indicated on the product

label. If you are uncertain of the type of power

supply to your home or business, consult your

service provider or your local power company.

The AC inlet on the unit must remain accessible

and operable at all times.

Note to System Installer

WARNING

TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS UNIT TO RAIN OR MOISTURE.

For this apparatus, the coaxial cable shield/screen shall be

grounded as close as practical to the point of entry of the cable

into the building.For products sold in the US and Canada, this

reminder is provided to call the system installer's attention to

Article 820-93 and Article 820-100 of the NEC (or Canadian

Electrical Code Part 1), which provides guidelines for proper

grounding of the coaxial cable shield.

This symbol is intended to alert you that uninsulated voltage

within this product may have sufficient magnitude to cause

electric shock.Therefore, it is dangerous to make any kind of

contact with any inside part of this product.

Ce symbole a pour but d’alerter toute personne qu’un contact

avec une pièce interne de ce produit, sous tension et non isolée,

pourrait être suffisant pour provoquer un choc électrique. Il est

donc dangereux d’être en contact avec toute pièce interne de

ce produit.

This symbol is intended to alert you of the presence of important

operating and maintenance (servicing) instructions in the literature

accompanying this product.

Ce symbole a pour but de vous avertir qu’une documentation

importante sur le fonctionnement et l’entretien accompagne ce produit.

CAUTION: To reduce the risk of electric shock, do not remove cover (or

back). No user-serviceable parts inside. Refer servicing to qualified

service personnel.

Summary of content (4 pages)

PAGE 1
IMPORTANT SAFETY INSTRUCTIONS Notice to Installers The servicing instructions in this notice are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions, unless you are qualified to do so. Note to System Installer For this apparatus, the coaxial cable shield/screen shall be grounded as close as practical to the point of entry of the cable into the building.
PAGE 2
Ground the Product Eliminate AC Power/Mains Overloads WARNING: Avoid electric shock and fire hazard! If this product connects to coaxial cable wiring, be sure the cable system is grounded (earthed). Grounding provides some protection against voltage surges and built-up static charges. Outdoor Grounding System If this product connects to an outdoor antenna or cable system, be sure the antenna or cable system is grounded (earthed).
PAGE 3
Provide Ventilation and Select a Location • Remove all packaging material before applying power to the product. • Do not place this apparatus on a bed, sofa, rug, or similar surface. • Do not place this apparatus on an unstable surface. • Do not install this apparatus in an enclosure, such as a bookcase or rack, unless the installation provides proper ventilation. • Do not place entertainment devices (such as VCRs or DVDs), lamps, books, vases with liquids, or other objects on top of this product.
PAGE 4
Declaration of Conformity This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1) the device may not cause harmful interference, and 2) the device must accept any interference received, including interference that may cause undesired operation. Canada EMI Regulation This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la class B est conforme à la norme NMB-003 du Canada. AVC VIDEO LICENSE With respect to each AVC/H.