User's Manual

Figure 7: Cisco ASR 901S Series Aggregation Services Router — Bottom View (A901S-2SG-F-AH)
Dust caps4SFP ports1
LEDs5Cable gland interface2
—
AC power input3
The following table provides the list of interface ports supported on Cisco ASR 901S Series Aggregation
Services Router.
Table 3: Interface Ports Supported on the Cisco ASR 901S Series Aggregation Services Router
DescriptionChassis PID
4 external SFP ports + 1 gland interface for internal ports, DC power supplyA901S-4SG-F-D
3 external SFP ports + 1 external copper (Cu) port + 1 gland interface for internal ports,
DC power supply
A901S-3SG-F-D
2 external SFP ports + 2 external Cu ports + 1 gland interface for internal ports, DC power
supply
A901S-2SG-D
3 external SFP ports + 1 gland interface for internal ports, AC PSU, 1 sec holdover for 1
power over Ethernet plus (POE+)
A901S-3SG-F-AH
2 external SFP ports + 1 external Cu port + 1 gland interface for internal ports, AC PSU,
1 sec holdover for 1 POE+
A901S-2SG-F-AH
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
8 OL-29732-01
Introduction
Cisco ASR 901S Series Aggregation Services Router: Top and Bottom View
REVIEW DRAFT - CISCO CONFIDENTIAL