User's Manual
Table Of Contents
- Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
- Contents
- Preface
- Introduction
- Preparing to Install the Router
- Installing the Router
- Mounting Kits Overview
- General Safety Information for Mounting
- Contents of the Mounting Kits
- Customer-Supplied Materials and Tools
- Router-Mounting Instructions
- Connecting the Chassis Ground and Power
- Opening the Router Chassis
- Power Connection Compliance
- Connecting the DC Power Cable to the Router
- AC Power Cable
- Connecting the AC Power Cable to the Router
- Connecting Cables
- Antenna Installation and Replacement
- Powering on the Router
- Enabling Zero Touch Provisioning on the Router
- Using CLIs for Flash Memory and Directory Procedures
- What to Do After Installing the Hardware
- Troubleshooting
- Specifications and Part Numbers
- Cable Specifications
- Site Log
Installation Checklist
To assist you with your installation and to provide a historical record of completed tasks and users, use the
following installation checklist. Make a copy of this checklist and mark the entries as you complete each task.
When the checklist is completed, include a copy of the checklist for each router in your site log along with
other records for your new router. For information on the site log, including a sample site log, see
Site Log,
on page 85.
Installation Checklist for Site:
Router Name:
DateVerified byTaskSl. No.
Installation checklist copied1
Background information placed in site log2
Site power voltages verified3
Installation site power check completed4
Required tools available5
Additional equipment available6
Router received7
Documentation DVD received (if ordered)8
Cisco Information Packet publication received9
Chassis components verified10
Initial electrical connections established11
ASCII terminal (for local configuration) or modem
(for remote configuration)
12
Signal distance limits verified13
Start-up sequence steps completed14
Initial operation verified15
Software image verified16
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
OL-29732-01 21
Preparing to Install the Router
Installation Checklist
REVIEW DRAFT - CISCO CONFIDENTIAL