User's Manual

CHAPTER 3
Installing the Router
This chapter describes the safety information, equipment, and procedures required to mount the Cisco ASR
901S Series Aggregation Services Router onto a vertical pole, wall, H-frame, or cabinet. This chapter contains
these sections:
•
Mounting Kits Overview, page 23
•
General Safety Information for Mounting, page 24
•
Contents of the Mounting Kits, page 25
•
Customer-Supplied Materials and Tools, page 29
•
Router-Mounting Instructions, page 30
•
Connecting the Chassis Ground and Power, page 43
•
Opening the Router Chassis, page 47
•
Power Connection Compliance, page 50
•
Connecting the DC Power Cable to the Router, page 50
•
AC Power Cable, page 51
•
Connecting the AC Power Cable to the Router, page 52
•
Connecting Cables, page 54
•
Antenna Installation and Replacement, page 58
•
Powering on the Router, page 61
•
Enabling Zero Touch Provisioning on the Router, page 61
•
Using CLIs for Flash Memory and Directory Procedures, page 63
•
What to Do After Installing the Hardware, page 66
Mounting Kits Overview
You will need some or all of the kits described in this section to install the router in the outside plant (OSP).
Your installation environment and requirements determine the kits you need.
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
OL-29732-01 23