User's Manual
Table Of Contents
- Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
- Contents
- Preface
- Introduction
- Preparing to Install the Router
- Installing the Router
- Mounting Kits Overview
- General Safety Information for Mounting
- Contents of the Mounting Kits
- Customer-Supplied Materials and Tools
- Router-Mounting Instructions
- Connecting the Chassis Ground and Power
- Opening the Router Chassis
- Power Connection Compliance
- Connecting the DC Power Cable to the Router
- AC Power Cable
- Connecting the AC Power Cable to the Router
- Connecting Cables
- Antenna Installation and Replacement
- Powering on the Router
- Enabling Zero Touch Provisioning on the Router
- Using CLIs for Flash Memory and Directory Procedures
- What to Do After Installing the Hardware
- Troubleshooting
- Specifications and Part Numbers
- Cable Specifications
- Site Log
•
Material: Metal, wood, or fiberglass poles
Figure 9: Pole Mount Kit Contents
DescriptionQty.NameItem
Install pole clamp bracket onto a pole. Wall mount bracket
attaches to pole clamp.
1Pole clamp bracket1
Use the pole clamp gusset to install the pole clamp bracket
onto a pole.
2Pole clamp gusset2
Use the included hardware to attach the pole clamp bracket
onto the pole, as described in
Mounting the Router onto a Pole,
on page 33
.
4M8 x 12 screw3
4M8 spring washer4
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
26 OL-29732-01
Installing the Router
Pole Mount Kit
REVIEW DRAFT - CISCO CONFIDENTIAL