User's Manual

To attach the appropriate connector the AC power cable, follow the manual or other instructions provided
by the electrical equipment vendor, ensuring that you comply with the electrical codes for your installation
location.
Caution
Figure 30: Router AC Power Cable (Router Connector End)
Connecting the AC Power Cable to the Router
Before You Begin
When connecting the router to AC power, you must ensure that the following conditions are met:
•
AC power can be readily and conveniently removed from the router. The power should not be removed
by disconnecting the AC power connector on the unit. It should be removed by disabling AC power at
the power circuit.
The plug-socket combination must be accessible at all times, because it serves as the main disconnecting
device. Statement 1019
Warning
Before connecting or disconnecting the power cord, you must remove AC power from the power cord
using a suitable service disconnect.
Caution
•
You must protect AC power plugs and AC receptacles from water and other outdoor elements. You can
use a UL-listed waterproofing enclosure suitable for covering the AC receptacle and AC power plug
that supplies power to the unit, as described in Article 406 of the National Electric Code (NEC).
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
52 OL-29732-01
Installing the Router
Connecting the AC Power Cable to the Router
REVIEW DRAFT - CISCO CONFIDENTIAL