User's Manual
Table Of Contents
- Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
- Contents
- Preface
- Introduction
- Preparing to Install the Router
- Installing the Router
- Mounting Kits Overview
- General Safety Information for Mounting
- Contents of the Mounting Kits
- Customer-Supplied Materials and Tools
- Router-Mounting Instructions
- Connecting the Chassis Ground and Power
- Opening the Router Chassis
- Power Connection Compliance
- Connecting the DC Power Cable to the Router
- AC Power Cable
- Connecting the AC Power Cable to the Router
- Connecting Cables
- Antenna Installation and Replacement
- Powering on the Router
- Enabling Zero Touch Provisioning on the Router
- Using CLIs for Flash Memory and Directory Procedures
- What to Do After Installing the Hardware
- Troubleshooting
- Specifications and Part Numbers
- Cable Specifications
- Site Log
Preface
This section describes the objectives, audience, organization, and conventions of this document—Cisco ASR
901S Series Aggregation Services Router Hardware Installation Guide.
•
Audience, page vii
•
Organization, page vii
•
Conventions, page viii
•
Related Documentation, page x
•
Obtaining Documentation and Submitting a Service Request, page x
Audience
This guide is designed for personnel who install, configure, and maintain the router. These persons should be
familiar with electronic circuitry and wiring practices and be experienced electronic or electromechanical
technicians. They should also be familiar with network structures, terms, and concepts. This guide identifies
certain procedures that should be performed only by trained and qualified personnel.
Organization
DescriptionTitleChapter No.
Describes the hardware and features of the router.
IntroductionChapter 1
Describes safety recommendations, safety warnings,
site requirements, network connection considerations,
required tools and equipment, and provides the
installation checklist.
Preparing to Install the RouterChapter 2
Includes router installation information, and shows
how to connect the router cables and modules.
Installing the RouterChapter 3
Cisco ASR 901S Series Aggregation Services Router Hardware Installation Guide
OL-29732-01 vii










